City of Information Technology

GPRS and MMS settings

2009-03-30T18:08:00.001-07:00

General Instructions
Except for the card IM3, penyetingan GPRS or MMS require activation process first.
Activation process is done in a way to contact the operator of the appropriate card is used.
About making the details of the activation can be seen on the GPRS penyetingan detailed below.

Setting GPRS Matrix / manual Mentari
Profile Name: Satelindo
Homepage URL: http://wap.klub-mentari.com
IP Address: 10.19.19.19
Bearer: GPRSUser
Name: indosatPassword: indosat
APN: indosatgprs
Activate GPRS: ACTGPRS to tell 888
Call Center: (021) 5438 8888 or 222 (from mobile)

Setting GPRS SIMPATI (Telkomsel)
Using a mobile phone with GPRS facility.
Still have a minimum balance Rp. 500, - under the value you can not use GPRS services, SMS and MMS.
Register as subscribers to GPRS, which can only be done through SMS. Type the message is the SMS: GPRS [card number] Example: GPRS 6210009922069556 Send to: 6616. Note: send SMS messages Rates: Rp. 350, - / message.
Card number is the number ICCID (Integrated Circuit Card Identification) of 16 (sixteen) digit number on the back and there is a chip card SIMPATI Nusantara you.

Make communication settings on the terminal that is used with the parameters as follows:
Connection Name: Telkomsel APN
Data Bearer: GPRS
Access Point Name: Telkomsel
Username: wap
Prompt Password: No
Password: wap123
Authentication: Normal
Homepage: http://wap.telkomsel.com
WAP Gateway IP Address: 10.1.89.130
Port: 9201 (standard), 8000 (proxy)
Located in the region GPRS.Untuk services using WAP GPRS Telkomsel with, make sure you have already registered on http://www.telkomsel.com.
To use the WAP GPRS Telkomsel with, make sure you make the handset settings to use Access Point Name (APN) Telkomsel.

Setting GPRS kartuHALO (Telkomsel)
Using a mobile phone with GPRS facility.
Register as a customer GPRS, registration can be done in GraPARI or contact Caroline on 111 numbers, toll-free service from kartuHALO you, or can be made via SMS: how: Type the message SMS: GPRS Example: GPRSKirim to: 6616. Note: send SMS messages Rates: Rp. 250, - / message.

Make communication settings on the terminal that is used with the parameters as follows:
Connection Name: Telkomsel APN
Data Bearer: GPRS
Access Point Name: Telkomsel
Username: Password wapPrompt: No
Password: wap123Authentication: Normal
Homepage: http://wap.telkomsel.com
WAP Gateway IP Address: 10.1.89.130
Port: 9201 (standard), 8000 (proxy) Located in the area of the GPRS service.
To use the WAP GPRS Telkomsel with, make sure you have already registered on http://www.telkomsel.com.
To use the WAP GPRS Telkomsel with, make sure you make the handset settings to use Access Point Name (APN) Telkomsel.

Setting GPRS XL

Automatically
Send the following SMS to 9667, only Rp. 350, - (including VAT free for users and has not been included for the user Xplor).
Settings for GPRS: GPRS (space) (brand mobile phone) (space) (mobile phone)
For MMS settings: MMS (space) (brand mobile phone) (space) (mobile phone)
example: GPRS and MMS SE K600i SE K600i
Writing and the types of mobile phone brands (not case sensitive)

MERK & TYPE (select one)

NOKIA or NOK3650, 3660, 5100, 6100, 6108, 6200, 6220, 6225, 6230, 6340i, 6600, 7610, 6610, 6610i, 6650, 6800, 6810, 6820, 7200, 7210, 7250, 7600, 7650, 7700, 8910i, N-Gage, N-Gage QD, 9500

ERICSSON or SonyEricsson or SET39m, T68, T68i, T230, T300, T310, T610, T630, P800, P900, P910, Z200, Z600, K700i, K500i, S700i, K600i, K750iSIEMENS: S57, SL55, SX1, C62, S65, SL65, CX65

SAMSUNG: X100, X600, E700

To activate GPRS / MMS in the system, contact Customer Service on the XL 818 through the free / Xplor you (toll free) 021 57959818 or through the other (subject to the tariffs in accordance with applicable).

Manual

Parameter Setting GPRS:
Connection name: GPRS XL
Data bearer: GPRS
Access point name: http://www.xlgprs.net
User name: xlgprs
Prompt Password: No
Password: proXL
Authentication: Normal
Homepage: http://wap.lifeinhand.com
Connection Security: - off
Session mode: permanent
Phone IP address: Automatic
Primary name server: 0.0.0.0
Secondary name server: 0.0.0.0
WAP Gateway IP Address: 202.152.240.50
Port: 9201 (standard), 8080 (proxy)

Setting GPRS IM3

Automatically
Send SMS to 3939 with the message: GPRS [Brand HP] [HP Type]
Example: - GPRS Nokia 7650 - Ericsson T68 GPRS-GPRS SE P800

Manual

Parameter Setting GPRS:
Connection name: M3-GPRS
Access point name: http://www.indosat-m3.net
User name: gprsPassword: IM3
Authentication: Normal
Homepage: http://wap.indosat-m3.net
IP address: 010.019.019.019Port: 9201 (standard), 8080 (proxy)

Intel Processor History

2009-03-23T19:48:00.000-07:00

Here are a few historical development of the processor and the Intel clone of its successful disarikan

* Debut Intel processor series starting with MCS4 which is the embryo of the processor's i4040. 4-bit processor is planned to be a brain calculator, in the same year (1971), Intel i440 to make revisions. Originally ordered by a Japanese company for the calculator, the processor is much more powerful than expected so that Intel's purchase rights to Japanese companies for the development and further research. Here for the development of the embryo of the processor to the computer.

* Next show 8-bit processor in the first i8008 (1972), but somewhat less preferred because multivoltage .. ago showing the new processor i8080, here there is a change in voltage that is a triple, a technology NMOS (PMOS no more), and introduce the first time the system clock generator (up additional chip), packed in the form of Array DIP 40 pins. Then also appear processor2: -1974 Motorola's MC6800, Z80 from Zilog -1976 (are the two rival weight), and another series prosessor2 artificial MOST 6500, Rockwell, Hyundai, WDC, NCR ff. Z80 full compatible with the i8008 only until the machine language level. Level rakitannya different language (not compatible level software). I8080 processor is the processor's internal registers with the 8-bit external bus 8-bit memory addressing and 20-bit (can access 1 MB total memory), and operating mode REAL.

* 77 Thn 8085 show, generatornya onprocessor clock, cikal bakalnya the use of single voltage +5 V (the implementation of s / d 486DX2, DX4 starting at +3.3 V ff).

* I8086, with the processor registers, 16-bit external data bus, 16-bit memory addressing and 20-bit. 78 yr Direlease using HMOS technology, components support 16 bit bus are very rare, so the price becomes very expensive.

* And for the market demand appear i8088 16bit internal bus, external bus 8bit. So that components can use i8088 peripherals 8bit former i8008. IBM chip select for this pebuatan IBM PC because it is cheaper than the i8086. If only the CEO of IBM PC that does not express mere side only dream, of course, IBM will take the total PC market at this time. IBM PC first release in August 1981 has 3 versions of IBM PC, IBM PC-Jr and IBM PC-XT (extended technology). I8088 chip is very popular, until the NEC has launched a chip that is built on the pin chip specification, which is named V20 and V30. NEC V20 and V30 is compatible with the processor to Intel assembly level language (software).

Save Web Page In PDF Form

2009-03-23T19:43:00.000-07:00

If you include people who like to save an article or web page to read offline and then you can try the service HTML to PDF Converter. This is a free service to convert your html files (web pages) to pdf files.

To use this service you can simply enter the URL of the web page to be converted. Then click the Make PDF. If the conversion process is complete you can immediately download the PDF file.

Free Rapidshare Auto Downloader

2009-03-23T19:38:00.000-07:00

Rapidshare Auto Downloader is a free software that can be used to ease you in to download many files from Rapidshare.

Rapidshare Auto Downloader has a feature that is quite interesting, namely:

* Download a group of links from rapidshare
* Download incomplete downloads until all links are downloaded
* Autoshutdown feature
* Load and save the download list
* Check for new versions automatically

To use this software is quite easy. You simply write or mem-paste the URL of the list will be downloaded on the Links field. Then click the Add Link (s). To start the download click Start Download.

By default the downloaded file will be saved in C: \. To change, click the Settings menu - Save to File.

To keep in mind, this software only as a download manager only, so will not be mem-bypass pause time between downloads.

You can download Rapidshare Auto Downloader here. So that this software can run with lancara then your computer must be installed. NET Framework first.

Safe Mode, benefits and usage

2009-03-01T04:07:00.000-08:00

For most we (computer users) may not be a foreign term to the Safe Mode. This feature is available in the Windows operating system, for different purposes. For example, to check or repair damage to the windows system, remove virus, examine the damage and the other driver.

How to enable Safe Mode and what you can when we are already entering Safe Mode?

What is Safe Mode?

Safe mode option is the choice of start-up windows that its main function to handle if there is a problem with the system. Windows will run with the minimal condition, only the files and drivers that are important in the switch, including any additional software, most software is not activated. Then when it is signed in safe mode, it will appear any posts "Safe Mode" at the top of the corner windows.

How to Log In Safe Mode

One way that can be used in almost all windows systems including Windows Vista is by pressing the F8 key when booting windows are (or when the computer starts up and show information Memory / hardware). After that will appear several menu options booting the computer, as follows:

Some explanation of Advande Options Menu

In addition to the menu to select Safe mode, there are many other menus that can be selected. Here are some explanation of the menu-the menu:

* Safe Mode, this option means that Windows will run only the minimum files and drivers, including software-software.
* Safe Mode with Networking, this option such as safe mode with the drivers so that we can utilize Network (Networking)
* Safe Mode with Command Prompt, the same as safe mode only program Command Prompt / MS-DOS Prompt (cmd.exe) will be activated immediately (not explorer)
* Enable Boot Logging, windows will create a file Ntbtlog.txt, when start-up and start-up information will be stored in the file. This file is usually stored in the root system, for example, drive C:
* Enable VGA Mode. Windows will be running with a minimum display modes such as 640 or 800 × 480 × 600. Usually used to check for damage or error [driver] VGA (graphic display windows).
* Last Known Good Configuration, running windows registry using the information that was saved when the last shutdown. Use one if we change the system configuration, or when the windows failed to enter the main display.

Some of the benefits of the Safe Mode

* Uninstall the software before the computer hangs, error and so forth. Sometimes after a certain program installed in the windows problem, so if you can not uninstall in normal mode through the use Safe Mode.
* Disabling of a particular program or application. To facilitate the entry into Safe Mode, can use the Autoruns application that can be obtained free from SysInternals. This technique can also be used to check the computer loading slow. If no Autoruns, can type in msconfig in the Run menu, to run the System Configuration Utility, if it has been selected to appear through the Startup tab.
* Checking the problems with the graphics display windows (VGA). When the display windows problem, can check in by selecting the "Enable VGA Mode", if successful, and do not see the problems, potential problems in the VGA driver.
* Delete the file / virus that can not be through the normal mode. Some antivirus can still run in safe mode, and tried to scan through safe mode. Sometimes the virus is not running in safe mode, although you can also walk / atif although in Safe Mode.
* Running System Restore if previously activated, so that the condition of the system can be restored to previous conditions.
* Running various features of the Control Panel, Administrative tools, and so forth.
* Open the Registry Editor, either to check or to edit some of the contents.

Safe Mode is a standard feature of Windows and sometimes quite useful for some problems such as over, although sometimes such as viruses can also be active in this mode, so use the safe mode is not enough.

Know more details about svchost.exe

2009-03-01T04:03:00.000-08:00

If we open Task Manager (Ctrl + Alt + Del) in the system windows XP or Vista, it will be more visible to the svchost.exe. Not just one but two are often seen quite a lot. But sometimes we do not know what the actual process is executed by svchost.exe, and how much we eat Memory.

In CodePlex, open source community project Microsoft, there is a small program that can make it easier for us to know more detail about svchost.exe.

SvchostViewer name, this small application, such as the name in a special design to see more detail about what is run by svchost.exe. Although we can find out more detail with Process Explorer from sysInternalls, but with this application more easily pengunaannya.

This software will make a scan (search) of svchost.exe running on the system and will appear in the Treeview, including applications that run detail, some features svchostViewer following:

* Seeing all of svchost.exe running on your computer
* Provide details of each sub-process and each process / application are executed.
* Showing the use of Memory (RAM), the size of data in the process and the "thread" is active for each svchost.exe
* Description of each process is executed and the program path (the location parameter in the file and run it).

Because this application only viewer, then we can not change, change the settings of the application that appears. This application does not need to install, and measuring only around 49 KB. To be able to run it necessary specifications:

* Windows XP SP2 and Vista
* Microsoft. NET Framework version 2.0 or above

If you are a C # programmer, it can also Download the Source Code is to be learned or developed.

Hide folder (data) with significant Hide Folders

2009-03-01T03:56:00.000-08:00

Sometimes we have data that not every person can see it, especially when used with a computer, the privacy issues sometimes become important. Although the windows have been providing facilities folder lock but this function is still a lot of weaknesses (sometimes not enough)

To overcome this, we can use free software to hide files and folders, Hide Folders.

Hide Folders is a program with the view that a simple and very easy to use. We live to add a folder that you want to hide in the list that appears in the Hide Folders. Once we activate the menu (icon) Hide the files and folders will be "lost" from view.

Although simple, but powerful enough Hide Folders. Folders that have been hidden can not be accessed, viewed in the search (search) or in the clear. Other users will not know the existence of this folder. And there is no limit on the number of folders that can at Hide (hide).

Following features Hide Folders

* Hide folder or data essential to the safe
* Running on Windows XP and Vista.
* Support file format system: NTFS, FAT32 and FAT
* Folders in hidedn can not be in the open / access the uninstall program.
* Number of folders that are hidden can not be limited.
* Even in Safe Mode, the folder remains hidden
* Working quickly realtif
* Display simple (and easy to use)

System needed

* Operating System: Windows XP, Windows Vista, Windows 2003, support the file system: NTFS, FAT32 and FAT
* Must have Administrator access rights.
* Not recommended to install on computers that already have similar programs (using the techniques hide the folder)

Hide Folder to be installed on the computer and can not run as portable application. But after the install, we can move applications from the installation folder (eg C: \ Program Files \ HFolders) to separate such Flashdisk place for us to access the computer, not computer people. However, to uninstall must return to the original folder (the original).

Use

1. Open Hide Folder
2. Click the "Add Folder" to add the folders you want hidden
3. Then click the "Hide" to hide.
4. To display a particular folder live menghlangkan check in the appropriate folder.

Program without the password will be the same, because it provided the password to open / use this Hide Folders. And be sure to remember this password, because even though the uninstall, the folder that has been hidden will not be back again so it appears.

If you forget a password or when the uninstall program, and we can not access data that is hidden, then we are still able to open or access the folders through a bootable CD like UBCD4Win, Ubuntu Linux or Windows operating system through the other. Hard drives can also be opened in another computer to access the folder. So I think this application is quite safe.

Tips Flashdisk Format with NTFS file system

2009-03-01T03:52:00.000-08:00

Some of us may be less attention to the file system type used Flashdisk us, whether it is NTFS, FAT32 or FAT. To find out the file system is used, right-click Flashdisk in Windows Explorer and select Properties. Here it is seen that type of File System is used.

But when we try to mem-format through windows Explorer, there may not have the NTFS, the FAT and FAT32 only. How do I mem-NTFS format and what is the difference with the FAT and FAT32?

Why NTFS?

NTFS format is a file system after the latest Windows FAT32, and have several advantages such as the ability to store additional information about the file / folder (metadata), security features, data compression, a better structure and more.

In addition, the type of NTFS can be used to format mem-size is greater, for only 2 GB FAT, FAT32 8 TB (8,000 GB), while NTFS can be up to 16 EB (16 million TB). Nevertheless, there remain only NTFS kekurangannya, such as not legible in the Win9x and the read write to disk more often.

Because each file / folder store more information (metadata), then read the writing process each file / folder will be more common than type FAT32 or FAT, so that for the flash, affect age (resistance). Given the memory limitations Flashdisk have read the writing. (Article about keeping to be more durable flash can be read here: Characteristics and Tips Flashdisk maintain more durable)

Enabling NTFS format in Windows Explorer

We can only mem-format USB Flashdisk with type NTFS with the help of HP USB Format Tools. But the actual Windows Explorer can do. To activate the following steps can be followed

1. Open System Properties with the right click My Computer> Properties (or a keyboard with buttons Win + Break)
2. Open the Hardware tab and then click the Device Manager
3. Select Disk Drive and select Flashdisk in which you want to format with NTFS, right click, select Properties.
4. Once open select the Policies tab
5. Select Optimize for performance, and click OK

6. Then try right-click the flash drive in Windows Explorer and select the Format menu, then there should appear NTFS File System.

To note when this option is enabled, each flash should always pull out through the Safety Remove Hardware. If the option is "Optimize for quick removal" is actually the flash can be removed immediately, without the Safety Remove Hardware

Test between NTFS, FAT32 and FAT

I have tried some of the comparison (especially the process to copy data) type with different, and the results are as follows:

11 * Copy the file (the size of each around 170 MB) total about 1.8 GB
NTFS 04:44 (4 minutes 46 seconds)
FAT32 05:09 (5 minutes 9 seconds)
FAT 04:46 (4 minutes 46 seconds)
1297 * Copy files (size between 1 KB to 23 KB) with a total of 8.23 MB
NTFS 29 seconds
FAT32 56 seconds
FAT 58 seconds
* Capacity in the format
NTFS 2,038,044,672 bytes Used space 12,937,216 bytes (12.3 MB)
FAT32 2,046,959,616 bytes Used space 4096 bytes (4.00 KB)
FAT 2,050,686,976 bytes Used Space 0 bytes

Copy the visible data with NTFS, relatively quickly, but after the size of the format a little smaller because of the additional space required is greater for the file / folder (metadata). If the flash is often used to read and write process does not require the NTFS features, such as data security, then select the type FAT32 may be better.

Prevent Virus Autorun.inf make the Super Autorun

2009-03-01T03:48:00.000-08:00

I had doubts the effectiveness of this way, because it thinks it easy for viruses to change, delete, and create a new autorun.inf file.

Some of this information I can after reading one of any posts in the blog WinPowerTips. Indeed, with only the file autorun.inf to make it, even though the system hidden attribute will be easily overcome by the virus. But there is described with three levels and the result is not easy to delete the file and try to make the virus Autorun.inf file with the usual way will fail.

The following short explanation of the level 3 (stages) to prevent the virus to create / modify the Autorun.inf file:

1. Prevent the virus to create the autorun.inf file on how to create a folder Autorun.inf. Because if you already have this folder then the Autorun.inf file will not be made.
2. Prevent virus remove Autorun.inf folder (with the usual way) by adding Unicode files inside. This fact can make the virus or error programmernya close if not overcome with good.
3. Prevents users Removing Autorun.inf folder with the folder not terhapuskan. Such as Microsoft own explanation that sometimes we can not remove file / folder name if the name is invalid (disability).

Explanation about the length of each level, please visit the blog directly the IT Guy is. Because there are also many tips-other interesting tips.

However, with 3 levels itupun, if virusnya (the virus) and the jelly can still overcome the virus and can still create Autorun.inf file to transmit itself.

Newer Magnetoresistive RAM (MRAM) many times faster than RAM

2009-03-01T03:37:00.000-08:00

If you always desired for a fast computer, an ordinary RAM may just not be a solution. German physicists and engineers have thus developed the Magnetoresistive Random Access Memory (MRAM), which is not only faster but also more energy efficient. MRAM seems like it will boost the mobile computing industry and stores the level of charge by changing the north-south direction of a magnet’s field. IBM and other manufacturers are planning to use MRAM, which could spin electrons to flip the magnetic fields, which is also known as the spin-torque MRAM, something that the German physicists have further improvised and built the fastest so far.

By building tiny pillars of 165 nanometres, which act, as variable magnets at the top end, allow current to pass through from bottom to top and the spin of the electrons take place. The fields are flipped and it takes a while for it to settle to it’s new orientation. Then, the north and south axis draw circles in the air before finally settling which causes a wobble. Since this depends on the magnetic field and the wobble that takes place in a field, the German team developed a way to observe and control a magnetic field’s wobble during and after the flip. Right now, the MRAM is about 10 times faster than a MRAM, which needs 10 nanoseconds, and the conventional RAM needs 30 nanoseconds. This speed will definitely increase in the months and years to come.

A basic Introduction to a PC

2009-01-18T15:02:00.000-08:00

Motherboard

Or 'mainboard'
Socket LGA 775 with PCIe Graphics slot

Socket 478 with an AGP Graphics slot

----------------------------------------------------------------------

Hard Disk Drive(s) (HDD)
Or 'Hard Disk'

...where your OS is installed and all the programmes, pictures and other data are stored.

----------------------------------------------------------------------

Power Supply Unit (PSU)
...the heart of the PC, therefore the most important part

Heres a generic one (Yuk!)

...and heres a higher grade one (highly recommended)

----------------------------------------------------------------------

RAM (Random Access Memory)

Or just 'Memory'

...can come in many specifications, but looks similar whatever you have installed

----------------------------------------------------------------------

Network Interface Card (NIC)

...for connecting to a home network/the internet by wire

----------------------------------------------------------------------

Central Processing Unit(CPU)

Or your 'Processor'
...the brain of your PC

You won't be able to see it, but its there, under a heatsink/fan (HSF)

----------------------------------------------------------------------

CD/DVD drive

Or your 'Optical Drive'

----------------------------------------------------------------------

You might not have any of the following, but its worth knowing what they look like if,
for example, you intend to buy one...

Graphics Card(GPU)

...or if you are more fortunate, something like this...

----------------------------------------------------------------------

Sound Card

----------------------------------------------------------------------

Floppy Drive (FDD)

----------------------------------------------------------------------

Card Reader

----------------------------------------------------------------------

Common Terminology

In this forum, you may come across some terminology that might confuse and distract you.
Some already covered in this thread are...

PSU (Power Supply Unit)
CPU (Central Processing Unit)
HDD (Hard Disk Drive)
FDD (Floppy Disk Drive)
GPU (Graphics Processing Unit)
NIC (Network Interface Card)

Here are two which will be covered in the next section...

OS (Operating System)
GUI (Graphical User Interface)

Whats this Windows Thing?

An operating system is a collection of data and programs which allow you to perform your tasks (surfing the internet, writing a letter, playing a game, etc...) in a simple, easy to understand format (a GUI).
Some of the most commonly used and sold OS's today are....

Windows XP

Windows Vista

...which are both made by Microsoft...

Ubuntu

OpenSUSE

Fedora

...which are all Linux distributions (free).

----------------------------------------------------------------------

To find out what version of Windows you are using:
hold the Start key and press Pause/Break

For XP...

...and for Vista

The method may vary by Linux distro, but the information is usually held in:
System > Administration > System Monitor (under the System Tab)

3 Quick Ways To Start Your Own Online Business In Less Than 24 Hours

2009-01-18T14:56:00.000-08:00

The Internet and online business especially are becoming more and more popular by the day in todays world simply because people are starting to see the true benefits of the web, consumers are starting to trust the web more, and more importantly, the start up costs for a online business are next to nothing compared to the offline world of business start ups.

The only set back most people run into when wanting to start one of their own online business is How and Where to get started.

I did a search under the keyword term "home based business" and the search results returned 575,000,000 results for that keyword alone.

That's a pretty intimidating number for someone wanting to start their own home based business on the web wouldn't you say?

These were the same obstacles I was up against when I first ventured into the online world of business.

But I didn't let that stop me and I hope that won't stop you either from wanting to start your own online business.

So, I saved you the hassle and put together 3 of the quickest ways for ANYONE(that's You) to start their own online business with next to no investment required and can get started in less than 24 hours.

Are you ready? I hope so.

Business Model #1. Affiliate Programs.

Affiliate Programs are simply programs set up by the business owner for others to sign up for and promote for the business owner for a agreed upon commission(usually between 10 - 75%).

The great thing about Affiliate marketing is it doesn't cost you a single penny to get started, you don't have to worry about refunds or customer service that come with owning your own product.

All you have to worry about is generating the traffic to your affiliate link and collecting your commission cheques.

This is the quickest way to get started online... Period!

Here's a few Affiliate Directories to give you a start:

Associate Programs - http://www.picmoney.com

Refer It - http://www.adsenselover.com

Business Model #2. Resell Rights.

Resell Rights are simply products that have already been created and are available to anybody who is willing to pay for the Resell Rights to market them.

The upside to this is you get Ready-To-Go websites with PROVEN sales letters that convert. The best part of all is... you get to keep 100% of the $Profits$.

The draw back is you can't claim those products as your own. The original creator of the product maintains full rights. You just get to keep all the profits.

Not such a bad trade off wouldn't you say?

Business Model #3. Private Label Resell Rights.

Private Label Resell Rights are simply products that are ready to be branded with your name to it.

What I mean by that is you get full rights to the product or products and are able to claim them as your own even though you didn't create them yourself.

This is the fastest way for anyone to start a online business who really doesn't have any experience or knowledge on how to create their own products.

The other really cool thing about Private Label Resell Rights products is they come with Ready-To-Go websites which then again saves you time and money in having to create them yourself.

Well there you have it, 3 Quick Ways To Start Your Own Online Business In Less Than 24 Hours.

You wouldn't be paid !!!

2009-01-15T09:03:00.000-08:00

You ever hear about scam site? Wow, there are bunch of them spread in www. That's make us irritant and waste our time for something useless or goalless. Now, I get some list of the scam sites, so if you have signed up or doing "paid to click" (PTC), "paid to surf" (PTS), "paid to sign up" (PTS), or "paid to read' (PTR) in the sites below, kick them out now..!!!

1
1000clicksptr.com
1-800-Mail.com
1-dolar-mail.com

2
200dollars-email.com
200dollarsmail.com
200eurocent-200euro.com
200euromails.com
25-dollars-mail.com
2dollaremails.com

3
300dollarsmail.com
30dollarsmail.com

4
400dollarsmail.com

5
500cents-500dollars.org
500pounds-and-500pence.com
50centptr.com

7
7centsolos.com
7thheavenptr.net

8
80euromail.com

A
ad-fortune.com
ad-qds.com
adsneed.com
ahacash.com
alwayspay.com
american-mails.com
amity cash*
a-n-cash.com
ans-advertising.com
apachemails.com
applemails.com
articmails.com
atom-mails.com

B
bank-mails.com
bearshare-mails.com
beautymails.com
beehivemails
bestflymails.com
bettybucks.com
bigdollar-mails
biggestdollars.com
Blue-Maniacs.com*
bluerwebmail.com
boffopaidmail.com
bondjamesbond.net
boratmails.com
boss-mails.com
businessptr.com

C
camel-mails.com
cash-kitty.com
casheden.com
cashorigin.com
cashpointclicks.com
cashread.com
cashsea.com
casino-mail.com
catch-cash.com
charm-mail.com
chicago-ptr.biz
Chobitsmais.coml*
cloudmails.com
closet-clickers.com
coast-mail.com
cooperativemail.com
cosmicwealth.com
cosplaymails.com
cowboy-mail.com
cream-mails.com
cy-mails.com

D
dallas-ptr.com
deliriouspaidemails.com
diamond-mails.com
dollar-factory.com
dollarslove.com
donkeycash.info
dragone-search.com
dreamstarmail.com

E
earn-emails.com
easy-gain.com
electron-mails.com
emailpremium.com
emailprofit.us
emailspayu.net
emails-empire.com
energy-mails.com
euro-emails.com
expert-mails.com
eyemails.com

F
flashrich.com
flaviomails.be
fourleafclovermail.com
forex-mails.com
forex-mails.com

G
gem-mails.com
getor-mails.com
getpaidbyemail.com
getpaideasy.com
giga-mails.com
gladiator.ws
goldearning.com
goldenemail.com
google-mails.com
green-cash.com
greetgold.com

H
hamburg-mails.com
happyearning.com
happyptr.com
hello-mails.com
herroptr.com
hellotomy.com
holiday-mails.com
hollywood-mail.com
honestmails.com
hummingbird-mail*
husky-mails.com

I
ice-mails.net
innotime-cash.com
interptr.com
invest-mail.com
ippomails.com*
iriverptr.com

J
jackpot-ads.biz
job-readmail.com

K
kiddays.com

L
lightstarmail.com
linkread.com
LinkBurst.com*
logans-legacy.com
lookingemail.com

M
magnetismail.com
mangoemails.com
maystromails.com
megaptr.com
mesmerizing-mails.com
meteor-mails.com
millionaire-mail.com
mistyandsamcash.com
minimails*
mobileptr.net
moneybagsmail.com
moneyems.com
moneys-bank.com
Mushmails*
MyBizs*
mygpt.com
mushroom-mails.com
mysweetheartmail.com

N
no2allmails.com
numenmail.com

O
ohomails.com
okaymail.com
one-mails.com
oneperson-mail.com
onlygravy.com
Opt-in-pays.com*
oursharedsuccess.com
ourpaidmail.com
outstandingmail.com

P
paidbizopmail.com
paidmailengine.com
paidstation.com
pay2searchers.com
payingcash.info
payyoudollar.com
pcash.info
pig-mails.com
peststar*
platinum-mails.com
polarbearmails.com
Poocool*
power-mails.com
ptr4you.net

Q
quality-profits.com

R
rainbow-mails.com
readrevenue.com
realmails.com
richmails.com
rivermails.com
rose ptr*

S
scarlettmails.com
secret-mails.net
seekbizs.com
sepooq.com
silvanamails.com
smile-email.com
SnowClicks*
softemails.com
southmails.com
space-mails.com
spicemails.com
solomaniac.com*
sprint-cash.com
spidermanemails.com
strongptr.com
studio-mail.com
summer-mails.us
sunflowersptr.com*
sunny-mails.com
super-program.com
superstarmail.com
Surfjunky.com*
surprisemails.com
symantec-mail.com*
systemmails.com

T
tango-mambo.com
tarantulas-mails.com
thegoldcave.com
thegoldmail.com
thegoldenemail.net
tiger-mails.com
timelessearn.com
tnt-e-mail.com
tomails.com
tons-referrals.com
trade-mails.com
trafficinvader.com
trustfulmail.com
Tulip PTR*
tycoonmails.com

U
united-empire.com

W
weapon-earnings.info
welovepay.com
western-clicks.com
western-mails.com

X
xsc-mail.com

Z
zyseamail.com
zy-mails.com

NTFS or FAT

2009-01-15T09:02:00.001-08:00

What are those?? Do you familiar with them? yups, they are kind of file system in Windows OS. Some people said if you Win 2000 or higher OS user, better to apply NTFS in your system because more stable than FAT or FAT32. Do you really considered about that?, o c'mon.. so do I. Now don't too hard to understand my posting, it's just tell you what are NTFS and FAT. Here is this..
NTFS: New Technology File System
FAT: File Allocation Table

Media Campaign on the Internet

2009-01-13T14:45:00.000-08:00

Have products, services, or anything that would promote the?
Many media campaign either online or offline. Here we will study about the online media campaign advertising through the Internet to market your products or services.

Campaign through the Internet has a distinctive feature compared to other campaigns. The advantages are:
1. Spelled out the cost of the campaign is not too big or even be free also.
2. Ads that you promote indonesian spread to all even to the world so that your ad will be read by people all over the world. Imagine if your campaign through brochures or magazines will be very difficult and expensive process is especially great if you target your campaign to other countries.
3. Advertising, which is relatively easy. Only through the Internet only, fill out the form and a list of advertising. Fast, easy, and effective.
4. Ad content can be changed every day. Yes, your ad can change at any time every day, every day, or every minute. If the campaign through newspapers, magazines, television, radio and this can not be done.

Many online media campaign that we can take advantage of. One is the category with the ad text ad text ad for free and paid. The text ads are free advertising without the cost of aliases while free text ads paid for the ads you need to pay for the ad. You can also install the ads in the media as a forum or PPC in the form of banner ads and text ads.

For banner ads, you can install on the website as indoforum.org while PPC ads can be in pairs on the website as kliksaya.com

Source : http://alfandra.blogspot.com/2008/12/media-promosi-di-internet.html

With USB Meremove Tool 1 Times Click With USB safely REMOVE

2009-01-12T05:13:00.000-08:00

For those of you who are in need software that can easily menstop tools usb on your windows xp or vista with just one click you can safely use the software USB Remove.

Remove the USB function safely
1. Your data will not be lost by using this software
2. Can use the shortcut to menstop equipment installed usb
3. Save time, because the tools usb you can stop in time with 1 click. Sometimes the default Windows often can not menstop usb devices installed so that the data may be lost on the more damage can be more parahnya
USB tool you

In safely Remove 1 How many times click click to menstop tools usb you. You can direct your mouse cursor on the system tray icon to stop the menu, and click to safely remove menstop tools you usb

Why a tool usb can not be stopped when a usb tool can not be stopped, USB Remove can safely display the process is running in the background, which caused a tool can not usb distop. You can end the process and repeating it again.

Stop the many instruments with usb keyboard shortcut through
You can use the keyboard shortcut global (Win + S settings as early Shortcut) to stop displaying the menu, and check the "Stop immediately" and the program will menstop tools that usb
installed.

Property USB Dimenu this tool you can change the name of the tool, change the image tools to change an usb keyboard shortcut for menstop tools - tools usb.

"Personalized" safely remove you can change an image of a tool from a folder in the disk image, select the one image you want with the image formats such as JPG, PNG, BMP, and ICO.

On the Settings menu you can change the settings you want to run this software, for example when windows startup.

Usb tool set all through the main menu you can mendrag equipment hidden from usb / Hidden to show / Displayed on this menu.

With USB stop Tools Command Prompt
You can menstop tool - a tool that you usb inserted through the command line / command line.

You can download the software at this address:
http://www.4shared.com/file/48315117/ecc8a711/USB_Safely_Remove_402665.html?s=1

Tips to protect the eyes when berkomputer

2009-01-11T04:10:00.000-08:00

For you that may be the same as I, to spend time ber hours at the computer every day, you need to remember to keep your vision. a few tips to protect my eyes from damage when berkomputer.

- If you use a computer CRT / tube. a low refresh rate can be dangerous to your eyes. Use 75hz refresh rate or more, so that your eye is not damaged are also not so tired quickly.

how:
right-click on the desktop> select properties> settings tab click the Advanced

On the monitor tab, right in the Monitor section settings change your monitor refresh rate to be 75 hz or more (I use 85hz). but does not monitor all mendukunya. check the 'hide Modes ...' so that the refresh rate that is not supported in your monitor is not in the show. if the press is ok. after pressing the button when the display monitor your ok to be lost means the refresh rate you select is not supported by your monitor. lansung just press the escape [ESC] Searched in order to cancel the settings.

- Do not forget to rest your eyes in a specific time interval. it is best to do so with a short but often. every 20 minutes with the rest of you look at things that is located far (3-5 meter enough) for 20 seconds.

next-tips are standard tips are:

~ distance between the eyes and monitor at least 40 cm

~ use pencahayan enough and does not dim

~ monitor the position of the eyes and face straight

~ such as an ad that said tetas eyes, look at the monitor or television frequency winking eye that can cause dry eyes, so try to remind myself to blink your eyes or use eye drops.

a few tips that I can share, hopefully useful.

GUI ScreenIO

2009-01-11T03:53:00.001-08:00

GUI ScreenIO is a screen manager intended for COBOL programmers who want to develop applications for Microsoft® Windows®.

The programming interface is clear, consistent, very straightforward, and pure COBOL. It's fair to say that, once you have the general idea of how to use GUI ScreenIO - which won't take long - you'll rarely need to refer to the documentation. It's that simple. Honest.

You do NOT need a Windows SDK (Software Developer's Kit), nor do you need any knowledge of Windows programming. GUI ScreenIO handles all of the complexity of working with Windows.

This image is a partial screen shot of the GUI ScreenIO panel editor, with two panels open for editing. The panel editor itself is a GUI ScreenIO application, written entirely in COBOL.

Using GUI ScreenIO

Design your panels using our WYSIWYG (what-you-see-is-what-you-get) interactive panel editor. The editor displays the panels just as your user would see them under control of your program. It's easy to add standard Windows controls, arrange them, set colors and fonts, include text for ToolTips, and in general arrange your panel the way you want it to look. See our list of Features.

You can even execute your panel in the editor and see how it will behave under control of your program.

Generate programs

Even though GUI ScreenIO programs are amazingly simple, it's even easier to have the panel editor create the shell of a program to handle your panels. The generated program is very clean, easy to read, well commented, and will compile and run your panel, unchanged.

All you need to do is to add your business logic, and you're well on the way to developing your Windows application.

GUI ScreenIO's program generator is template-based; it's very easy to modify the template so that it produces COBOL programs that conform to your own standards or preferences.

Display your panels

GUI ScreenIO handles all of the low-level Windows details for you. You just call our runtime subroutine to display the panel; when it returns, it tells you why (usually, the user pressed a button or selected something from the menu), and it returns your data in your panel copybook. It's much like record-oriented I/O to a file, but simpler.

10 Tricks Click Right Answer

2009-01-10T06:27:00.000-08:00

Right-click on the mouse that is preferred by many because of the enthusiastic options and features offered, but its potential is often not used in full on the desktop in general. Right-click can be a good way to re-computing automation activities to save you time and energy. Below are some additional tools to add you right-click function in Windows, Mac and Linux.

10. Add Right Click Menu in Nautilus (Linux)
File manager for the GNOME desktop environment has a right-click menu that are less functional by default. With some additional package, you will be able to rotating and error in the image without requiring a separate application the editor, open the terminal and quickly add the option "Run as administrator" so there is no need to type the password sudo.

As a first step, Ubuntu users can install the nautilus-gksu, nautilus-image-converter, and nautilus-open-terminal. Distro user can type "nautilus" (or "konqueror" for KDE-based systems) in the package manager to see their functions are available on the right-click them.

9. Use at Two Jari Trackpad for Right Click (Mac)
If you just use a Mac, or rarely work especial configuration then you may not know this trick. Mac laptop has only one button click, and you usually have to press Control and click at the same time to do the right click, but actually there's one way: you can put two fingers on your trackpad to right click.

To enable this function is open "System Preferences" and select "Keyboard & Mouse", in the Trackpad provide a check on the option "For secondary clicks, place two fingers on the trackpad then click the button." MacBook also has the latest movement of three fingers and four fingers that you can learn.

8. Right Click Menu in Google Maps
You can find out how to visit a good restaurant through a search on Google Maps without having to know the address. Do a search on Google Maps, right-click and select "Directions from here" or "Directions to here" in the context menu, unfortunately, this trick is only useful in countries where Google Maps data is complete.

7. Rightload: FTP with One Click
Anyone who has a site that often make or FTP transfer should try RightLoad. Enter the data to your FTP server in RightLoad, after that to send the file to the server is done with the right-click and select the destination server. Once completed, RightLoad will provide a link in HTML format for your friend to share and automatically change the name of duplicate files.

6. Set Menu "Send to" in Windows
You can set the "Send to" in the box that appears when you right-click on Windows. You can add shortcuts, email or open a file. Look customization guide "Send To" in Windows 98 and XP by Howard Dickens; Vista to try to read the guidelines in HowToGeek.

5. Set the Finder on a Mac with FinderPop
FinderPop is a tool to cut the number of clicks needed to copy or move files on the Mac. FinderPop can also launch applications or applications that do not kill stable, right-click menu to change you into a multipurpose launcher.

4. Adding or Removing the Context Menu with ShellExView
After you remove a program, they often leave the ex-former in the context menu you. With ShellExview, you can set any option that appears when you right-click a file, desktop, or even Internet Explorer. You can add the program, and delete the shortcut link that is not useful.

3. Set Menu Right Click on the Mac with OnMyCommand
You can either automation action with OnMyCommand, an application Applescript / command line that you can add your own scripts to the right-click menu Finder. Look for the instructions SimpleHelp in OnMyCommand more.

2. Custom Context Menu for Specific Files
If you want a right-click options for different types of files, then try to make the process see the context menu for this custom (from MetaFilter thread) Windows XP. For users of Vista to try FileMenuTools.

1. Combine Various Right Click Menu with FileMenu Tools
If you use Windows and do not have enough time to try all the tricks in this list, try one of FileMenuTools. FileMenuTools function is not as deep as other tools, but simply right-click function to increase as you add options to the context menu, add to the "Send To", adding functions such as "Run Command Line from Here" and "Copy Path" without having to touch the registry or command line option.

If there are other tools that are your favorites, please share them in the comments. Congratulations try.

The Top 10 Secrets of Successful Authors

2009-01-09T08:40:00.001-08:00

If you are not a successful author yet, incorporate the following 10 Secrets:

1. Treat your book as a business.

You spend many hours creating a masterpiece to help your audience. It follows then, you need to set up a regular time schedule to market and promote it.

2. Create a flyer for each book you offer.

Hand out your flyer at business meetings or at any public place. Ask your audience to pass the flyer along to friends and associates. Offer one free report or ezine on the flyer to get new email addresses to send promotion to later.

3. Create a line or two about your book in your signature file that goes on every email you send.

After your name, title, and benefit statements, add something like: eBk: "Write your eBook or Other Book--Fast!" Include your addresses and phone numbers too.

4. Invest some money in book marketing.

Contact a book coach and schedule a low-cost introductory session to see if you are a match and will get what you need. Many authors print too many copies or use an expensive service to get book finished instead of putting aside an equal amount to market it.

5. Take a teleclass on how to market your book.

These low cost and low time investments can make your book the great seller it should be. Discover inexpensive ways to market via the phone and email. How convenient!

6. Don't get fooled by high-cost services.

If it's too good to be true, it isn't true. When you hire someone to do it all for you, it can cost over $1000 a month with small results. Check out what services fit your budget, and get a realistic picture of what your results will be.

7. Delegate some of the marketing.

Like me, hire a low-cost computer assistant from your local high school. They know more than many professionals. For under $10 an hour, you can multiply your promotion exponentially via ecommerce your assistant does for you 2-3 times a week.

8. Set a dollar goal for your book each month.

Don't count copies sold. Count each month's book sales. Put your goal near your workstation to remind you of what you want. Don't price your book too low, so you'll appreciate an easy experience--getting what you deserve for all your work.

9. Learn more about Internet book marketing.

Think about reaching hundreds of thousands of your audience every week. When you give them what they want--free information--they will eventually buy. Many authors go the traditional path of talks, ads or press releases. They don't always pay well for the effort.

10. Don't stop marketing.

Many clients come to me and say they are discouraged their book didn't sell well in four months. Replace doubt with patience for the process. Success takes many months, but once you get it, the Internet keeps it multiplied for you.

Knowing the secrets of successful authors can help you receive the same prestige and become a household word.

One Minute Marketing

2009-01-09T08:38:00.000-08:00

So, you say you're too busy to market your book? Well, welcome to the club. Most of the authors I work with or coach work day jobs and try to cram in as much marketing as they can after they come home from an exhausting day at the office. Working this way can be completely overwhelming. It’s no wonder mot authors only market their books for ninety days. Who could stand to keep up this pace any longer than that? There were so many things authors need to do, most simply don’t know where to start.

Enter the one minute marketer. As tempting as it is, we can’t do everything. It’s just not realistic. Instead, try doing just three things a day. I found that authors are not only more focused this way but tend to be a hundred times more effective. If you're marketing your own book and you're becoming overwhelmed by the magnitude of the work ahead of you, try doing just three things a day. Some of these will only take you a minute and in one week alone you'll have promoted your book in fifteen new ways. And remember, your three things don't have to be earth shattering, they can be as simple as sending a thank you note.

Here are a few ideas you can implement today:

1. Call your local library and sign up to do a talk. You won't get paid for this, but they will let you sell your book (for a 10% commission back to the library).

2. Want to drive more attention to your book? How about creating a contest! Contests are great promotional tools. Design one around the topic of your book. For example, I'll be holding a contest soon asking people for the top ten things NOT to do when you're marketing your book. Get the idea?

3. Pitch your story to a local radio and/or tv station.

4. How's your web site these days? Remember, it's your 24/7 marketing tool so make sure it's up to date.

5. And while you're updating your web site, why not list it on search engines like Google, Alta Vista. Or go over to http://www.addme.com and let them do it for you…for free!

6. Have you thought about submitting an article to a topic-related ezine? Ezine publishers are always looking for content! If you currently subscribe to an email newsletter that you'd like to contribute to, email the editor and ask them what their guidelines are. Or, you can submit your article by registering at the following yahoo group: Publish In Yours (PublishInYours-subscribe@yahoogroups.com).

7. Have you started calling bookstores for signings? Why not start that today.

8. Send your thank you notes! Whether it's to a news person who did a feature on you or to the book store manager who recently hosted your book signing, saying "thank you" is a great marketing tool!

9. Magazine articles are a great way to get exposure. Why not submit an article (or book excerpt) to a topic-related magazine today?

10. Are a member of all the pertinent organizations in your field of writing? If not, you should be. For example, if you wrote a mystery novel you should think about joining a mystery writing group in your area. Not only will you be able to promote your book at meetings but most groups are always looking for speakers.

Happy Marketing!

Creating images with ASCII ASCII Chart Generator

2009-01-08T14:30:00.000-08:00

ASCII Art Generator is a text art generator. By using the software you can convert the image into text style - both full color or black and white - with a fast and easy. You choose the image you want to convert (can be full color image or the image of black and white), set the output format you want and click Conversion.

Homepage: http://www.ascii-art-generator.com/

Disassemble Password Office 2000

2009-01-06T15:01:00.000-08:00

Password is a facility of the MS Office 2000 that is used to protect documents from people who do not have the right. This password is used to be very important if the document contains sensitive data.

Unfortunately the facility to be catastrophe if we forgot password. Not profit, but even that inconvenience. If so what is the solution?

Of course you need a password recovery program that can be used to dismantle the password is forgotten. One of them is the Advanced Office 2000 Password Recovery can be downloaded at the www.elcomsoft.com.

Advanced Office 2000 Password Recovery AO2000PR called normal or not can only be used to dismantle the password on the MS Word document, but it can also be used in MS Excel, MS Access, MS PowerPoint, MS Project, MS Outlook, MS Money, MS Backup, MS Schedule +, MS Mail, MS Internet Explorer (Content Advisor), and Visio.

To unload the document is password is as follows:

1. Run the program AO2000PR. Select the documents by clicking on the icon .

2. Determine the type of attack. If you choose Dictionary attack you must have a dictionary file it. If you choose Brute force attack the character set that will be used on the Brute force range of options.

3. If all of the settings have been made then press the untukmemulai dismantling password.

4. If the password has been found will appear in the image look like on the side.

5. Unfortunately for the unregistered version can only unload password with maximum number of characters 4. If you want to do with the limits to registration, of course with the dollar amount of pay: (. But if you are diligent in surfing the Internet you can find crackingnya.

Changing the logo Booting Windows XP

2009-01-05T15:25:00.000-08:00

By default Windows XP logo to show the flag during the process of booting Windows XP. Maybe you are bored with the logo of the Underworld, and replace the logo with a more interesting, such as in the picture below.

By using free software BootSkin you can do so easily. You can use the logo provided by the program. If there is no logo of the match, you can download the logo from the Internet and to import files to download bootskin results in the program BootSkin.

Disabling the Autorn USB

2009-01-04T14:57:00.000-08:00

In a flash disc, which affected the virus is usually (not always) there is a file autorun.info in which there is a command to run the virus program. So, when the flash disc is inserted into the USB drives autorun feature is not in disable the Windows will automatically run the program in the background without the user's confirmation.

One way to reduce the risk of the virus is infected with mendisable features autorun on USB drives. There is also the way are as follows:

1. Click the Start button - Run.
2. Type gpedit.msc and press OK.
3. Click on the User Configuration - Administrative Templates - System.
4. 2x click on Turn Off Autoplay.
5. Click on the Enable option.
6. At the option Turn off Autoplay on, select All drives.
7. Click OK.
8. Done.

Many accounts run Yahoo Messenger

2009-01-03T23:19:00.000-08:00

Yahoo Messenger (YM) is one of the most used messenger to communicate via the media text (chat) online. By using the YM you can communicate with friends, family or relationship.

Normally you can only run one time YM at the same time. With the following tips you can run YM several times so that at the same time you can log in using some of your yahoo account.

How is as follows:

1. Start the registry editor with the click Start - Run. Type regedit and press enter.
2. Go to the key HKEY_CURRENT_USER \ Software \ Yahoo \ Pager \ Test.
3. On the right pane, right-click menu and select New - DWord Value.
4. Type Plural.
5. Click on 2x Plural and content with the value 1 (one).
6. Exit the registry editor.

If you follow the above steps correctly then you can run several times YM.

In addition to the above ways, you can download the file ym8multi.zip and 2x click on the registry settings in it. To restore all the settings as you can download ym8multi_unist.zip.

Tips on only for Yahoo Messenger version 8 which you can download the http://messenger.yahoo.com/

Download Free McAfee VirusScan Plus 2009

2009-01-03T23:16:00.000-08:00

McAfee VirusScan Plus 2009 is a software protection for a PC that includes anti-virus, anti-spyware, anti pishing, firewall, etc.. To get this software you must normally spent about $ 30 - $ 40.

But with the download via this link you can obtain the software free of charge. Promotional code in the field filled with VSPPROMOCF please, and then click Submit Code which resumed with the click Checkout.

Then you can immediately download the installer McAfee VirusScan Plus 2009.

Coupon promotion you can use up to 31 December 2008.

Knowing the IP Address Sender Email

2009-01-02T18:19:00.000-08:00

When you read the email may be visible only date information, to, cc, bcc, subject and message. In each email sent would include information such as the complete message id, mailers, ip address, and so forth.

If you want to know the ip address the email sender and its ISP used tips you can read the following.

Yahoo Mail:

1. Login to Yahoo Mail.
2. Select one of the email that you want to check.
3. Click on the link or Full Header, which is located at the bottom right.
4. Locate the "Received: from [...] by."
5. In the example below addressnya IP is 61.94.152.147.

MS Outlook Express:

1. Open Outlook Express program.
2. Right-click on one of the email that you want to check.
3. Click the Properties menu.
4. Click the Details tab.

10 Firefox Addons To Favorites

2009-01-02T05:58:00.000-08:00

Firefox browser is my favorite since the last few years. One of the main reasons is the number of free addon that can be added to enrich the features of Firefox. This is of course different with the Internet Explorer and Opera, which only have a few options AddOns or plugins.

Below is a list of 10 important addon for the "comfort" in doing your surfing activity:

1. Adblock Plus

The many ads in a web page, in addition to "disrupt" the process will also slow loading web pages. With this addon you can block ads, both text ads and image ads (banners).

2. Flashblock

Used to block flash. Suitable for you to use the low-speed internet connection. You can still play the flash terblok by pressing the Play button.

3. Tab Scobe

To display the preview of web pages, similar to the features previewnya Opera.

4. Screengrab

With this addon you can make screenshoot display web pages.

5. DownloadHelper

With this addon you can download videos from hundreds of video sites on the Internet such as Youtube, MetaCafe, Google Video, Yahoo Video, etc. directly from Firefox, download manager without special assistance.

6. Foxmarks

With this addon you can synchronize bookmarks (list of sites that are saved as a favorite). Suitable for your regular access the Internet from many places, such as office, home, cafe, etc..

7. GreaseMonkey

With GreaseMoney and the script is in the userscripts.org you can "to customize" a site, for example, by mem-pass countdown download Rapidshare, to block the ads on GMail, create dropdown Gmail login page, etc..

8. FlashGot

This is a firefox addon that integrate with your favorite download manager. You can "combine" FlashGot with FlashGet, BitComet, Download Accelerator Plus, GetRight, MassDownloader, and so forth.

9. Tab Mix Plus

Addon will add many new features, especially relating to the tab, for example, create a duplicate tab, lock tab, the focus, restore the tab closed, and so on.

10. Fast Dial

Fast Dial will "change the" content of the tab empty at the time to open a new tab with the tab that contains a thumbnail of your favorite sites.

Find the money on the internet

2008-12-31T20:31:00.000-08:00

Various ways that can be done to get dollars from the Internet ranging from reading email, surf, play games and even chat. Not seem reasonable. But that is the reality. So the question, from where they get the money to pay for it? The answer easily. They get money from companies that are presenting advertisements on the web or bar their view.

Let not curious you can try several sites or programs below that is believed will pay to members. In addition, after (you register and) the money you've reached a certain amount then they will send a bank draft that you can check Dilute in many banks in Indonesia.

EPilot
This site is similar to the search engines that you know, but the difference is that this site will pay you as much as 5 U.S. dollars when you first registered, plus 0.03 U.S. dollars each you do a search.

The Mail
The Mail is similar to other email services like Yahoo, Hotmail, Allow Mail, etc.. Which if you use the Mail is that you will receive $ 0.0025 for each message you read, no matter where it came from the email. The more email that comes to your mail box also the more money you will get. To improve the incoming email to the mail box, you can follow the various mailing lists. Please see the list of mailing lists in Groups E.

TerraShare
By creating a web site in TerraShare then you have the opportunity to make dollars. Because each 1000 appearance banners times you will get 1.25 U.S. dollars. As a free web hosting services other, the banners will be placed on each of your web page.

CashFiesta
That is suitable for you about the surf. After you register to CashFiesta then you should I download and install them on your computer. Now, when you run I was online. So for you online and I use them, you will get dollars. There is also the amount of 0.60 U.S. dollars per hour.

Meanwhile, site or program that is believed will not pay to the members-aliases thumper mock program is as follows:

Surfing:
GetPaid4, cast-net Solution, DotAd, Go4Billion, MakingCash, PrizeWindow, SurfAd, SurfMiles, Surfing2Cash, SharkHunt, Itadsup, Urge2Net, Paybar, VIPBenefits.

Email
AmazingSolutions, ClickMail, DoughMail, epidemic already, EqualPoints, E-Cash, MiracleMail, Trespass, opt-in, PaidEmail, Payolaemail.

Another
Alliance4Wealth, CashActive, ClickyCash, DataCash, RockSurfer, TheStudentSaver, ColorStamp, PaidZone, WePayAll, AdPerks, SurfBuzz, Ad4Me, Zemtro, FunnyMoney, Clicks2Asia, ClickZones, ShopVault, Profinity, RewardBuddies.

Check the IP Address via ip-adress.com

2008-12-31T20:20:00.000-08:00

IP Address is a unique identity for each connected computer in the network, both local and Internet.

When you connect to the Internet, the ISP (Internet Service Provider) that you use will give you the IP Address (public ip) automatically (IP address different ip address for your local jaringn).

To check the IP Address provided by the ISP when you connect to the Internet, you can visit the site:

http://ip-adress.com/

When you open the site then automatically displayed ip address, country, city ISP and the name of the ISP you use, such as the image below:

Add a background image in IE toolbar

2008-12-31T02:38:00.000-08:00

To get results like the picture above, is as follows:

1. Open the registry editor.
2. Search key HKEY_CURRENT_USER \ Software \ Microsoft \ Internet Explorer \
Toolbar.
3. Create a new String Value with the name BackBitmap. I right click on the right panel, select New - String value.
4. Click twice on BackBitmap, content with the path of the location of image file that will be used as background. For example C: \ My Documents \ image \ gambar.bmp.

In addition, the files that you can use a file with the extension *. bmp.

Showing information system

2008-12-31T02:34:00.000-08:00

To display the information system on Windows XP, you can type in the MS DOS Prompt:

systeminfo

Once you press enter the information will appear as shown in the picture below:

MS-DOS Part 4

2008-12-28T20:16:00.000-08:00

Understanding IP Command

Below are the commands associated with the network. To make these commands you should go to MS DOS Prompt.

ipconfig / all
Showing the connection configuration information, such as the Host Name, Type Primary DNS, LAN Ethernet Adapter.

ipconfig / displaydns
Showing DNS cache.

ipconfig / flushdns
Removing DNS Cache

ipconfig / release
"Removing" all connections IP Address.

ipconfig / renew
Create a new IP Address to a specific adapter.

ipconfig / registerdns
Do refresh DNS connection and re-register DNS.

ipconfig / showclassid
Showing information DHCP Class.

ipconfig / setclassid
Change the DHCP Class ID

control netconnections
Displaying Network Connection.

ping
Example: ping-www.klik kanan.com
Make connections to the test site www.klik-kanan.com. The little% loss is to eat the better connection.

tracert
IP Address displays route.

netstat
Display connection information TCP / IP is currently active.

route
Showing local route.

hostname
Showing the computer.

MS-DOS Part 3

2008-12-28T20:14:00.000-08:00

DOS hidden parameters

TRUENAME
Used to display the path to a file or directory
Syntax:
TRUENAME filename --

FDISK / STATUS
It's way easier to see the hard disk partition information. Usually if we have to go first to FDISK and then select option 4. But with FDISK / STATUS we can see the partition information. This at least can we cut the work and reduce the risk of error in the FDISK. Note: This command will not work on DOS 3:30.

FDISK / MBR
The above command will write to the master boot record on the hard disk without changing the partition table information. As a note, writing in the master boot record (in this case) can cause problems on some dual-boot program. For you who have to install Linux and Windows on one hard disk and put LILO on the master boot record, you can remove the LILO command. You can also remove the virus that attacks the boot sector, with the booting from the disk clean and FDISK / MBR.

SHELL = C: \ COMMAND.COM / P / M in (config.sys)
The above command will run a "Fail" on the "Abort, Retry, Fail" (options "Abort, Retry, Fail" appeared normal in the case of "problem" at the time are on the DOS prompt).

Ver / R
Display information about the DOS version is more complete

Parameter confidential format
Determining the size of cluster: format drive: / z: ClusterSize * 2
Does not store information for unformat: format drive: / u
Example:
Format d: / z: 8 will result in a cluster size of 4 kB Example:
Format d: / z: 32 will result in a cluster size of 16 kB

Tips MS-DOS Part 2

2008-12-27T22:15:00.000-08:00

Move directory dg easy on the DOS prompt

You knew DOS prompt, can only display 8 characters (for file names and directory). When your suitcase and move the directory by typing cd Program Files (for example), there will be errors. This is because the DOS prompt in the Program Files directory will be seen to be routine ~ 1. This, of course we can be confusing. There is an easier way to do "operation" on a file or directory of more than 8 characters. How to add quotation marks. For example: cd "Program Files" to move to the Program Files directory.

The key functions of the DOS prompt

The buttons below you can use to accelerate the DOS command prompt in DOS.
Buttons Function

F1 or right arrows
Calling the past, letters per letter Calling the entire contents of

F3
command last

F6 with Ctrl-Z
To end the writing command bactch

Ctrl-C
Cancel command

Tips MS-DOS Part 1

2008-12-27T22:13:00.000-08:00

DOS errors Displays code

Often confused or are experiencing errors in executing the external DOS? (eg, chkdsk, xcopy, attrib, etc.)? Now do not anymore, because you can know what mistakes you make. How the MS-DOS Prompt type COMMAND / Z. This command does not apply to internal commands such as copy, dir, rename, etc.. To return to MS-DOS mode "normal" you simply write the exit COMMAND.

Alternatively call the MS-DOS prompt

In addition to the menu via the Start / Programs / MS-DOS Prompt, there are other ways to enter the MS-DOS Prompt. How, go to the Start / Run and type in COMMAND then click OK.

Hidden parameters for the DIR

DIR command appeared to have a parameter that is hidden, namely DIR / Z. If you type the command, the DOS will show hide files with long names that usually appear on the right. If you type DIR / B so that the name will appear only in length only. Meanwhile, DIR / Z / B will show a short name only.

WHAT IS DOMAIN

2008-12-27T12:59:00.000-08:00

Definition of Finance Domain

A time when we want to access a particular web site, we usually just type the web site address in the browser, and in some time, we view a site that will soon be heading on the monitor screen. Similarly, when we send each other emails, that we need is an email address to determine where the message we will be posted. All the facilities are not separated from the role of the domain.

Actually, what was the domain? Before we discuss more about the understanding of the domain, we need to know a little about how a host on the Internet accessible environment. Internet consists of millions as the host computer that spread throughout the world that all inter-related through a hierarchy of the network with certain. The hosts are mutually communicate through a standard protocol called TCP / IP (Transmission Control Protocol / Internet Protocol). So that each computer forming the network can communicate with one another, so each must have a specific address. This address should be unique, so there is no bolah two hosts that have the same address.

System that used a combination of the number 4 train between 0 s / d 255, each separated by a period (.), From 0.0.0.1 to 255255255255. The row of numbers known as IP address (the IP address). Each host is connected in a network must have an IP address as the identifier that can bekomunikasi with a host of the network. Pengalamatan based IP enables Internet put address more than 4 billion hosts. In fact, not all combinations of IP addresses can be used. There are several special combination that is reserved for specific purposes that may not be used for purposes pengalamatan, for example, the IP 127.0.0.1 is required to appoint (lookup) to the local host.

Although technically pengalamatan IP based system is reliable enough, but he still has weaknesses. Human brain is generally not easy to remember the combination of numbers in large numbers. The solution is associate IP number in the combination of letters that make up a name that is easily remembered. Now, the host name as the identifier in the Internet network is a key domain, while the system pengalamatan based domain known as the Domain Name Service (DNS).

Source : http://www.indoglobalweb.com/?action=news&aid=13

What is Affiliate Marketing?

2008-12-27T00:02:00.000-08:00

When asked what business the most possible to get results very quickly, or the quick, then answered is Affiliate Marketing. But affiliate marketing is often seen next to the even-sloping up to turn back. In Indonesia, if there are job opportunities for marketing usually always get to the priority. If Bush is so employee input data and marketing, people usually choose Indonesia always so employees. I do not know why I could so. So when marketing, so the opportunity is greater than kayanya employees kantoran.

I want that yet, let them also. Now, back to the Affiliate Marketing. If you get so rich bids from online business, I can ensure they will teach you 2 things. The first is how to sell ideas and information and the second is affiliate marketing. Then, if the seller or the author ebook wrong? The answer is no. In fact, I dare say-seller ebook ebook at this time that many accused as spammers or scammerpun not guilty at all.

But, for beginners, they feel as if gullible. But that happens is they are not familiar with the affiliate marketing. They also can not distinguish between the consumer and the affiliate. Ebook so many buyers who konsentrasinya split between learning or sell or even if I have a free ebook buy merchandise ordered wedew ...

... So what is affiliate marketing? Affiliate can be as cooperative. For example, A is the author of the book, but he can not sell, then the B offers as an affiliate to sell the product A. The B will perform a variety of steps to be marketing a product of the behavior. So the A tasty dong. Ongkang live-foot ongkang, and traffic came to the easy flow of money. If I become a gitu aja.

When the B a beginner in online business, it will probably become so. But remember, a beginner is usually also a specialist in the sale so that even if the hundreds of troops have A affiliate, but if all the bushes so tetep A aja money can do. In short when B is able to get a buyer, then the A commission must ngasih to B as a sign of business services to market on the A. The Commission is usually 50:50. So if the product price 120 thousand, then to 60 thousand and 60 thousand A to B. What if B only bring visitors aja but the visitors who come just lihat2 ago only to go away.

So the B can not spelled success in selling. And of course there is no commission. So if you, as B, is up to the promo-bleeding and blood can not be and have sales to the A to give you a commission, yes, of course, is not fair. How good are most of the blame that the A omongannya and not mere fabrication. But that happens is you as the seller is not able to convince potential buyers. Be ready for that need to be addressed. If many other affiliate of the seller is able to get much more while you are not at all, it means you are higher keroknya ..

... But if all the affiliate can not afford to sell, it can be a sales letter (letter of sales in the front page) web so that the seller currycomb mother. In fact there are tips telling you how to be able to sell well. But because it is long, so I continued aja article in the future, ... hehehhe ... (this is also one of the tips biar rame blog ... hahaha) Save web pages to PDF free with freepdfconvert.com Online Campaigns If you enjoyed this post, please consider to leave a comment or subscribe to the feed and get future articles delivered to your feed reader.

Comments Comment by almadury on December 23, 2008 @ 10:52 am there is also reason betulnya, but I think the newbie's mind right .. also because they are looking for information that will reveal their eyes on the real Internet business, not only to provide the missing information they need info .. I accept the newbie really nendang .. I think they will also be happy to affiliate (menjualkannya participate), but what a normal-normal aja .. they may be unwilling. For the newbie do so willingly join affiliate, when they know their info is less interested as well, because I think they have the capital behind the goal so that's it. I hope the internet marketer who does not take advantage of this senior, because it will be too much info (overload), which received so confused newbie will begin to move from place and finally silent.

Source : http://cafeblogger.web.id

Adsense Tips for Bloggers 2 - Is Your Blog Suitable for Adsense?

2008-12-26T04:52:00.000-08:00

s your blog suitable for Adsense? - Before you rush into signing up for Adsense expecting it to earn you a million dollars it is worth asking the question of whether Adsense is the right revenue strategy for your blog. By no means is it the only option - you might like to check out this tip on other ways of making money from blogging.

Whilst there are some amazing success stories about earning big dollars with Adsense out there, it is worth taking a realistic look at some cold hard truths about the Adsense program.
Google does not accept every site that applies to the Adsense program.
Google Adsense Program Policies indicate that the content of sites must not contain things like excessive profanity, pornography, illicit drugs etc. Basically your blog needs to have content that is reasonably ‘family friendly’.

Also in their policy document is a reference to them not normally accepting pages of a personal nature. This is the topic of discussion in many Adsense forums and is obviously open to different interpretations. Many (if not most) blogs are personal in nature - however to maximize your chances of approval by Adsense a blog should be targeted on a particular topic/s. For example whilst this blog is often personal in nature - most of my individual posts (pages) focus on very specific themes which are repeated throughout the blog. update - this may have changed recently with Blogger now allowing blogger blogs to use Adsense.

Sites accepted into the Adsense program are also required to be easily navigable, have an adequate quantity of text based content (don’t apply if you’ve been blogging a week) and be written in English, French, German, Italian, Dutch, Portuguese, Japanese, or Spanish. They may not to have excessive advertising or other contextual/competing advertising.

Whilst not stated in the Adsense Policy document, many also believe that sites accepted into the program also need to have reasonable levels of traffic. If your blog is new, it may be worth waiting a few weeks or months before applying to build up traffic and content levels. Others speculate that a professionally designed, well-organized and privately hosted blog has a better chance of being accepted. The more professional and successful your blog appears the more likely it is to be accepted by Adsense.

If still in doubt after reading Google Adsense Program Policies you can email Google for clarification or just apply and see how you go.
Of course, acceptance by Google into the Adsense program does not guarantee your success. The fact remains that certain blogs will always be more successful than others at generating income.
Future posts in this series will focus upon strategies and tips for increasing your revenue but it should be stated here that the most successful sites are generally sites with very high traffic levels and/or content that is directly related to a particular product or service (the more targeted and niche-like the better).

It is also worth saying that Adsense works best on pages with lots of text content. It only reads text in determining ads, not images so make sure you have enough relevant content.
The next posts in this series will expand upon these aspects of successful blogging with Adsense with our Adsense Equation.

Source : http://www.problogger.net

Adsense Tips for Bloggers 1

2008-12-26T04:49:00.000-08:00

How do you make money from the Google Adsense Program? What AdSense Tips can you share with us?

I have been asked this question so many times in the past few weeks that I thought I should write something on the topic. It seems increasingly bloggers want to try to cover their hosting and ISP costs with some revenue from their blog - and increasingly they’re doing it and are able to make a few (or quite a lot) dollars on the side. Many are turning to Google’s Adsense program.

Covering costs of my Digital Photography Blog is why I originally signed up with Google Adsense - blogging can get expensive when you have high levels of traffic and a lot of pages.

Whilst the agreement you sign with Google stresses that you are not allowed to give specific information about your earnings from the program I can say that I’m glad I’ve signed up because its well and truly covered my costs - and then some. In fact I think its quite feasible to expect that Adsense coupled with other strategies for making money from Blogging could quite easily generate a decent living. It takes time and hard work, but I think its very doable. (Update: Since writing this series I’ve revealed that I am now looking at making over a six figure income this year in 2005 from blogging).

So how do I make money from Google Adsense? Let me share some AdSense Tips that heve helped me.

This will be the first in a series of posts on this topic. Let me say up front I’m no expert - there are a lot of people out there making a lot more money than I am using Adsense - however most of them are not telling their secrets - well not for free anyway. I’ve got no secrets to hide and am willing to share what I’ve learnt since I signed up for the program 8 months ago. If you want a REAL expert’s opinion on Adsense I’d recommend buying Joel Comm’s What Google Never Told You About Making Money with Adsense E-Book. Joel earns $15,000 per month from Adsense and has some good things to share.
I know some bloggers are put off or offended by the idea of making money from blogging so I’ll try not to let these posts dominate my blog - however if you are not interested in the topic, simply skip over these posts.I am going to assume a few things in this series to cut down the amount of introductory comments I have to make. Here is what I am assuming:

You have a blog. Whilst most of the following tips will apply to other types of websites I run Adsense on blogs and will speak from that experience.

You have (or will) read a basic overview of Adsense and have some understanding of what it is.

You have(or will) read the program policies as outlined by Google. These give details of site eligibility, ad placements and other requirements for using the system.

Enough introductory comments - lets get stuck into the Adsense Tips for Bloggers!

Source : http://www.problogger.net

Register a URL address to the Google website

2008-12-26T04:36:00.000-08:00

Search engine optimization

2008-12-26T04:28:00.000-08:00

Search engine optimization (SEO) is the process of improving the volume and quality of traffic to a web site from search engines via "natural" ("organic" or "algorithmic") search results. Usually, the earlier a site is presented in the search results, or the higher it "ranks," the more searchers will visit that site. SEO can also target different kinds of search, including image search, local search, and industry-specific vertical search engines.

As an Internet marketing strategy, SEO considers how search engines work and what people search for. Optimizing a website primarily involves editing its content and HTML coding to both increase its relevance to specific keywords and to remove barriers to the indexing activities of search engines.
The acronym "SEO" can also refer to "search engine optimizers," a term adopted by an industry of consultants who carry out optimization projects on behalf of clients, and by employees who perform SEO services in-house. Search engine optimizers may offer SEO as a stand-alone service or as a part of a broader marketing campaign. Because effective SEO may require changes to the HTML source code of a site, SEO tactics may be incorporated into web site development and design. The term "search engine friendly" may be used to describe web site designs, menus, content management systems and shopping carts that are easy to optimize.

Another class of techniques, known as black hat SEO or Spamdexing, use methods such as link farms and keyword stuffing that degrade both the relevance of search results and the user-experience of search engines. Search engines look for sites that employ these techniques in order to remove them from their indices.

Webmasters and content providers began optimizing sites for search engines in the mid-1990s, as the first search engines were cataloging the early Web. Initially, all a webmaster needed to do was submit a page, or URL, to the various engines which would send a spider to "crawl" that page, extract links to other pages from it, and return information found on the page to be indexed.[1] The process involves a search engine spider downloading a page and storing it on the search engine's own server, where a second program, known as an indexer, extracts various information about the page, such as the words it contains and where these are located, as well as any weight for specific words, as well as any and all links the page contains, which are then placed into a scheduler for crawling at a later date.

Site owners started to recognize the value of having their sites highly ranked and visible in search engine results, creating an opportunity for both white hat and black hat SEO practitioners. According to industry analyst Danny Sullivan, the earliest known use of the phrase search engine optimization was a spam message posted on Usenet on July 26, 1997. Early versions of search algorithms relied on webmaster-provided information such as the keyword meta tag, or index files in engines like ALIWEB. Meta tags provided a guide to each page's content. But using meta data to index pages was found to be less than reliable because the webmaster's account of keywords in the meta tag were not truly relevant to the site's actual keywords. Inaccurate, incomplete, and inconsistent data in meta tags caused pages to rank for irrelevant searches. Web content providers also manipulated a number of attributes within the HTML source of a page in an attempt to rank well in search engines.

By relying so much on factors exclusively within a webmaster's control, early search engines suffered from abuse and ranking manipulation. To provide better results to their users, search engines had to adapt to ensure their results pages showed the most relevant search results, rather than unrelated pages stuffed with numerous keywords by unscrupulous webmasters. Since the success and popularity of a search engine is determined by its ability to produce the most relevant results to any given search allowing those results to be false would turn users to find other search sources. Search engines responded by developing more complex ranking algorithms, taking into account additional factors that were more difficult for webmasters to manipulate.

While graduate students at Stanford University, Larry Page and Sergey Brin developed "backrub", a search engine that relied on a mathematical algorithm to rate the prominence of web pages. The number calculated by the algorithm, PageRank, is a function of the quantity and strength of inbound links. PageRank estimates the likelihood that a given page will be reached by a web user who randomly surfs the web, and follows links from one page to another. In effect, this means that some links are stronger than others, as a higher PageRank page is more likely to be reached by the random surfer.

Google headquarters
Page and Brin founded Google in 1998. Google attracted a loyal following among the growing number of Internet users, who liked its simple design. Off-page factors (such as PageRank and hyperlink analysis) were considered as well as on-page factors (such as keyword frequency, meta tags, headings, links and site structure) to enable Google to avoid the kind of manipulation seen in search engines that only considered on-page factors for their rankings. Although PageRank was more difficult to game, webmasters had already developed link building tools and schemes to influence the Inktomi search engine, and these methods proved similarly applicable to gaining PageRank. Many sites focused on exchanging, buying, and selling links, often on a massive scale. Some of these schemes, or link farms, involved the creation of thousands of sites for the sole purpose of link spamming. In recent years major search engines have begun to rely more heavily on off-web factors such as the age, sex, location, and search history of people conducting searches in order to further refine results.

By 2007, search engines had incorporated a wide range of undisclosed factors in their ranking algorithms to reduce the impact of link manipulation. Google says it ranks sites using more than 200 different signals. The three leading search engines, Google, Yahoo and Microsoft's Live Search, do not disclose the algorithms they use to rank pages. Notable SEOs, such as Rand Fishkin, Barry Schwartz, Aaron Wall and Jill Whalen, have studied different approaches to search engine optimization, and have published their opinions in online forums and blogs. SEO practitioners may also study patents held by various search engines to gain insight into the algorithms.

Source : http://en.wikipedia.org/wiki/Search_engine_optimization

Caring Laptop Batteries

2008-12-23T22:17:00.000-08:00

Here are some tips from the mixed commission is lansiran:

- Do not use the battery and charger is not compatible notebook. If you are not sure with the compatibility of the battery charger or used, contact the manufacturer of the notebook's service-related.

- Notebook battery can be hot even in normal usage. Do not use a notebook placed in your lap.

- When using a notebook, avoid placing the notebook on the surface of the soft / soft, such as on the sofa, bed or carpet. For the surface as it will prevent the flow of air at the bottom of the notebook and could cause overheating.

- Prevent the occurrence of contacts on the battery holder is loose with a variety of objects made of metal, such as paper clip, coin thin, and so forth.

- Battery notebook, including the notebook itself of course, do not occur until the excessive pressure caused the drop, hit, terhimpit or tertumpuk by heavy objects on top of it. This will cause the circuit in the battery's going to be vulnerable in short-circuit (korslet) which then lead to overheating.

- Do not place the notebook in the aera can become very hot, such as under the blazing sun or in the car that diparkir long enough in the open during the day.

- Being exposed to water or wet, it is to be avoided from the notebook or the battery. Although dry up and will be able to function normally, circuits in the notebook or the battery will slowly erode the safety and vulnerable users.

- Make sure you understand how to use, store and charge your notebook battery, and that has been written in the manual.

Voice over Internet Protocol

2008-12-21T14:27:00.000-08:00

Voice over Internet Protocol (VoIP, IPA: /vɔɪp/) is a general term for a family of transmission technologies for delivery of voice communications over the Internet packet-switched networks. Other terms frequently encountered and synonymous with VoIP are IP telephony and Internet telephony, as well as voice over broadband, broadband telephony, and broadband phone, when the network connectivity is available over broadband Internet access. or other

VoIP systems usually interface with the traditional public switched telephone network (PSTN) to allow for transparent phone communications worldwide^[1].

VoIP can be a benefit for reducing communication and infrastructure costs by routing phone calls over existing data networks and avoiding duplicate network systems. Skype and Vonage are notable service provider examples that have achieved widespread user and customer acceptance and market penetration.

Voice-over-IP systems

Source : http://en.wikipedia.org/

NOKIA SECRET CODE

2008-12-21T06:01:00.000-08:00

The key Tricks Open Secret Code Access HP / Mobile / Cell Phone / Your Nokia Mobile Edition. The following is the key to the secret key code that can run your own type in your phone's keypad hp that the Nokia brand, which both CDMA and GSM.

1. See the IMEI (International Mobile Equipment Identity)
By the way, press * # 0 6 #

2. Viewing the software version, date and type of software compression software
By the way, press * # 0 0 0 0 #
If not successful try e * # 9 9 9 9 #

3. Viewing the status of call waiting
By the way, press * # 4 3 #

4. See the number / number of private number to contact your mobile phone
By the way, press * # 3 0 #

5. Showing all the phone numbers diverting calls
By the way, press * 2 1 # #

6. See the number on the transfer of telephone callers because you do not answer (call divert on)
By the way, press * 6 1 # #

7. See the number callers on the phone because it diverts outside the reach (call divert on)
By the way, press * # 6 2 #

8. See the number on the transfer of the callers because of busy phone (call divert on)
By the way, press * # # 6 7

9. Changing the logo on the service type nokia 3310 and 3330
By the way, press * # 6 7 7 0 5 6 4 6 #

10. Showing the status of the SIM clock
By the way, press * # 7 4 6 0 2 5 6 2 5 #

11. Switching to profile your phone profile
How to press the power button off without arrested

12. Changing the setting hp nokia to default or manufacturer
By the way, press * # 7 7 8 0 #

13. Conducting reset the timer mobile phone games and score nokia
By the way, press * # # 7 3

14. Viewing the status of call waiting
By the way, press * # 4 3 #

15. Viewing the code factory or factory code
By the way, press * # 7 7 6 0 #

16. Showing a serial number or serial number hp, making the date, the date of purchase, the last date of service, transfer of user data. To exit the phone must be reset again.
By the way, press * # 92702689 #

17. Security code to see your mobile phone
By the way, press * # 2 6 4 0 #

18. See ip address your hardware bluetooth
By the way, press * # 2 8 2 0 #

19. Activate the EFR with the best sound quality but the lavish energy batteries. To turn off using the same code.
By the way, press * # 3 3 7 0 #

20. EFR activate the sound quality but the lowest energy-efficient batteries. To turn off using the same code.
By the way, press * # 4 7 2 0 #

21. Towards the contents of phone book quickly in the mobile phone nokia
How serial number and press # example: 150 #

22. Switch the call to the number that it's correct for all calls. By the way, press * * 2 1 * # Tax Goal

23. Switch the call to the number that it's correct to call the missed
By the way, press * * * 6 1 Tax Goal #

24. Switch the call to the number that it's correct for phone calls when you are busy hp
By the way, press * * * 6 7 Tax Goal #

Additional Information:
- Code diinput without a space
- There is a code nokia applicable only in certain types of

Hopefully useful.

Maintenance Your HP (Tips & Tricks Care Handphone)

2008-12-21T05:39:00.000-08:00

How to Care and maintenance your HP?

1. Make sure the phone you always dry. drop of water, humidity and all types of liquids or moisture can mengandum minerals that will corrode electronic circuits. If Phone cell infected water, quick disconnect the battery and let it dry completely before the handphone battery in the tide.

2. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage the battery, and can also thaw komponen2 your phone is made of plastic.

3. Do not open coba2 mobile devices you own, other than that allowed by the manufacturer ... in accordance with the instructions in the user's guide you.

4. Do not use harsh chemicals, cleaning solvents, or detergents that are hard to clean perangkant mobile phone.

5. Use only have been provided by the manufacturer or recommended. Antenna, antenna, modifications or additional accessories that are not recommended can damage the device and a mobile phone you can violate regulations governing radio devices.

6. Before the mobile devices to tell you in the service center (when the phone problem), make a back up first (such as the number of contacts, calendar, file applications, el de el)

7. Do not store or use the phone in dusty, dirty areas. Because the components that can be removed and electronic components can be damaged.
8. Do not store the phone in cold areas. because, when the temperature back to normal, moisture can form inside the component you posel and result in damage to electronic circuits.

9. Do not drop, knock, or shake your phone. the treatment is not against terpat hp pet you can break internal circuit boards and small komponen2 in your mobile phone.

10. Do not Paint your own mobile phone, I paint layer can clog the various components that can be removed and may also hamper the operation of the operation.

Concerns ......

Source : allhandphone.blogspot.com

Top Ten Registry Dos (and Don'ts)

2008-12-21T05:26:00.000-08:00

Messing with the Registry--and doing so incorrectly--can destroy Windows, send your PC to computer heaven, and cause you great distress. I'm not kidding. Here are my ten tips to keep your system here on Earth--and to keep yourself anxiety-free.

1. The utmost protection from Registry hassles, or any computing disaster, is to have a current backup. I really mean it. As in, you ought to do one now while you're thinking about it. For a thorough tutorial, read "How to Prevent a Data Disaster" or "Fifteen Backup Programs to Safeguard Your Data." And if you don't have one, grab a backup tool from our Downloads library.

2. In most other programs that walk you through with wizards, it's no big deal if you don't pay attention and you merely keep clicking the Next button. That isn't the case with Registry cleaners. I strongly encourage you to stay alert and read whatever the cleaning tool has to say.

3. Before you open the Registry cleaner, use ERUNT (The Emergency Recovery Utility NT) to back up the Registry. Sure, I know, it's redundant, since the Registry cleaner will back up any changes it makes. But I like an extra level of security. You will, too, if something goes awry.

4. When you begin scanning, make sure not to have any applications running; if possible, it's also smart to unload any tools running in your system tray. That's because open apps are constantly making Registry changes, and you want the Registry cleaner to do its work with no interference.

5. After the scan, the program will let you remove--or in some cases, repair--the Registry errors. If you're given the option, set the Registry cleaner to remove errors only at the safest and least-intrusive level. (You can scan with more-aggressive settings later on.) Even at that, you might see 1000 or even 2000 "safe" entries that need cleaning. For instance, Registry First Aid found 2161 problems on my production system, of which about 1900 it deemed safe to alter.

Whatever you do, never choose an autoclean option, such as the one in RegSeeker. Ever. They are not to be trusted.

6. Choosing which of the errors to remove or repair can give you a migraine. When I inspect a list of potential entries to remove, I scan for things that look familiar. For example, in my lists I saw almost 100 Registry entries left over from a package of Dell drivers I had uninstalled months ago, and one Registry cleaner spotted invalid paths to dozens of entries for MP3 files that I had moved to a new location. Both of those catches were accurate, and gave me the sense that the program's removal suggestions were on target.

After a couple of days, if your PC doesn't do anything weird, try another scan, this time allowing the Registry cleaner to work more aggressively.

You must, however, examine entries marked with 'Caution', 'Extreme Caution', or some other indicator of risk very carefully. I'm still not kidding. Unless you're an advanced user and can clearly identify the scope of the entry, leave it alone. The reason is that, even if the cleaner offers an option to restore a deleted Registry entry, restoring might not be possible if the DLL entry you just deleted is essential for your system to boot.

7. Once you give the tool the go-ahead and it starts removing Registry entries, walk away from your PC. Play with the dog, have some coffee, or watch TV. This is for safety purposes: If you're fiddling with the PC--moving the mouse, deleting desktop shortcuts, whatever--you're making changes to the Registry while a Registry cleaner is working. Not a good idea.

8. If you discover a problem (for instance, maybe Excel no longer launches), don't panic. And don't do anything aside from using the Registry cleaner's restore feature, which ensures that only the changes the program just made are reversed. That will probably fix the problem. If not, the next step is to restore the Registry with ERUNT, the tool I mentioned in step 3. As a last resort, restore your PC with a backup program--which you certainly have, right?

9. You needn't perform a Registry scan more than once a month or so, especially if you don't often make changes to your PC. Scanning more frequently won't hurt anything, but you're unlikely to see a significant performance boost.

10. Are you a techno-fanatic who needs the Registry to be squeaky clean, with absolutely no stray entries and trimmed of all fat? There's no harm in using multiple freebie Registry cleaners--provided you use them one at a time. You might also want to select a Registry cleaner (such as jv16 PowerTools or Registry First Aid) that includes a defragger, or choose a free defragger such as Auslogics Registry Defrag.

Source : Steve Bass, PC World

How to Clean Your Windows Registry and Speed Up Your PC

2008-12-21T05:20:00.000-08:00

A cluttered Registry can slow Windows to a crawl, but cleaning it up effectively isn't easy. Steve Bass reviews some of the leading Registry cleaners, and offers tips to help you get your Registry down to size and improve your PC's performance.

Let's start with a little quiz. I say "Big, bloated, and full of errors." What do you say? Right, "Windows Registry." One more: "Messing with it is risky." If you guessed the Registry again, you pass. While fooling around with your Windows Registry does involve some risk, cleaning it out can have an impact on your PC's overall performance.

The Windows Registry is an essential system file that houses a massive collection of details about your computer--where programs are stored, which helper programs (known as DLLs) are shared among your various applications, listings of all your Start-menu shortcuts, and pointers to the programs that fire up when you click on an icon. And that's just the beginning.

Practically everything you do in Windows is recorded somewhere in the Registry. For instance, the URL for this article probably has an entry now. The paths to the last dozen or so images or documents you opened are there, too, as are the details of the programs you most recently installed or uninstalled.

Here's the problem: If you pry open the Registry, you'll probably find it about as cluttered as a teenager's bedroom. That's because Windows doesn't efficiently clean up after itself as it goes about its daily business. It constantly creates new entries, but seldom--if ever--removes them after they're no longer needed.

Compounding that problem are applications that are too inept to uninstall all of the Registry entries they create; far too often, program upgrades and installers leave unneeded pointers in the Registry. So the Registry becomes bloated with unnecessary entries, slowing down your system.

Source : Steve Bass, PC World

Opening Youtube Without Block

2008-12-18T06:42:00.000-08:00

How mad by the government with close access to Youtube should be faced with how mad, too. Here's one way that I use to avoid the block of Youtube.

1. Slipstream download the program here.

2. Install the program to complete the icon that appears in the corner of the globe right taskbar.

3. Right-click the icon select settings.

4. In connection tab, enter the login information for your ISP. Then click OK.

5. Please do connect as normal, and please open Youtube with your favorite browser. This program will change the proxy to the proxy your ISP Slipstream, which is located in the United States.

To know whether this program is working or not can be seen from kelap kelipnya world football icon was. When ikonya kelap twinkle means the program is working.

Source : http://www.blogdokter.net/

Incoming Windows Without Administrator Password

2008-12-18T06:35:00.000-08:00

Lose or forget the password for the administrator user of WindowsXP into a large landslide. The owner of a computer can not enter and use the computer bersistem operation WindowsXP. Moreover, in the computer data was stored important data that does not acquire a backup before.

For those who like to play play in the Internet world, certainly they will find many patches or other similar programs that can open again without using WindowsXP admin password. Unfortunately, this program is distributed in the world's many underground aka undergound is not guaranteed security. Same fate even buntung not get what is sought, even a computer can contract the virus while playing up the screen in the world bran.

In the world of health effect saying "better to prevent than treat," and saying it is also valid for the admin password. We can create a password reset disk to log on to the WindowsXP when we forget the password is admin. Of course, this disk should be, because it is not possible for us to create a password reset disk when we have forgotten the password admin. Do not make reset disk, the only entrance difficult.

To create a password reset disk, try the steps below:

1. Click Start, click Control Panel, then click User Accounts.

2. Click the name of your account. 3. Under Related Tasks, click Prevent a Forgotten passwords.

4. Follow the next in the Forgotten Password Wizard to membuah password reset disk.

5. Save this disk in a safe place, Keep out of reach of children, because other people can log on to your computer without permission to use this disk.

Note: To do the steps above, the computer must be connected to a removable disk drives such as floppy disk drives.

Source : http://www.blogdokter.net/

Tips for Buying New Laptop

2008-12-18T06:19:00.000-08:00

Having a laptop is not longer a dream difficult to realize. If the laptop is still the first luxury, and part of the lifestyle, currently have a laptop has become a requirement.

This phenomenon quickly read by the laptop manufacturer. They flood the market with different types of laptop following a more affordable price. On the one hand, this is very beneficial for us as consumers we are given flexibility in accordance with the laptop, choose the budget and our needs, but for those who jump in the new world of laptop, this is very confusing. They were so dizzy seven in determining the choice of mobile cell number of options available.

The following two steps that can be used as a grip before buying a laptop.

Step 1 Define Objectives and Requirements.

Ask yourself in, if you want to buy a laptop, will be used for what the laptop. What is used for office work, the task assignment school, just for browsing and email-ber-an, given to the children you know that a new computer, or used to play the latest games?

For example, if you want to use the laptop to play the latest 3D games then you need a laptop with graphics card capabilities adequate. When buying, you can ask the shop keeper to find the laptop memory card with at least 128 MB of graphics following all the capabilities. Do not buy a laptop with a graphics card 'on board', although significant in terms of specification, and the ability of the graphics card 'on board' far below the graphics card that add on. The horror graphics card installed the more expensive laptop so that you must consider the available budget.

If you buy a laptop that is not to play the game so you do not think the problem is too graphic card. Some office jobs such as typing, Internet and video editing specification does not require a graphics card that high. Of course you can get a laptop, with prices relatively cheaper.

So after you determine whether the laptop will be used to play games or not then you should consider what the programs will run on your laptop is. This is important to determine the ability of the processor and RAM from the laptop, you will have. So you read the minimum specifications of the laptop needed to run the program you use.

Step 2 Selection Hardware This step is the most important step of your desire to buy a laptop.

In this step, you will be able to decide how quickly the laptop system that you want. Why this is important, because if you choose the one you will not be able to replace the laptop innards that you buy. Need this here, the more expensive the more you pay the 'wow' specifications of the laptop that you will get.

Here are some offal laptop that you should take note.

CPU. Processor, or CPU will determine how quickly your system work in executing a program. There are many options that the CPU can be considered. I will not spell out here because it is too long, you can read their own sites in each of the CPU manufacturer. I can only suggest you take a minimum of dual-core CPU unless you have funds that are not sufficient. If there are more funds, you can consider using the processor Intel Core 2 Duo or AMD X2. Memory (RAM).

This hardware served to store data from programs that are running. Like the brain, the greater the storage capacity of RAM, the more programs you can run simultaneously. RAM also required a large program to run programs such as heavy graphics and video processing. Currently, the minimum required RAM is 1 GB, but how good you can get 2 GB of RAM. Hard Drive (Storage Media). The device is working hard to save the data in a long time. Music files, videos, office work and others are some examples of files that are often stored in the HDD. The roomy capacity HDD it will be more files that you can save. The performance of the laptop will not be too affected by the large capacity HDD.

That is 3 hardware that you need to note in selecting a laptop. End this end, the availability of facilities WIFI can also be considered, given bertebarannya Hotspot free to surf in the virtual world. When this feature is not available, you can add a lot of WIFI cards sold in the market.

Care When the laptop purchase, please always take the warranty offered by the seller of the laptop. Do not be afraid to behave in these issues choosey as the laptop is expensive goods will damage the fragile, so you can remain safe to use. Note the type of seal warranty, what follows is borne by all conditions that become dependent warranty. If you do not feel comfortable, better you cancel the purchase of laptop you regret it later in the day. I say, the brand is not important, what matters is the availability of after-sales service in your city. What's the point you are using a laptop, and when the damage occurred you would bring confusion to go.

Moreover, you should plane to the capital city just fix the laptop. This certainly is not practical and many spend the money. Do not buy a laptop, which is in the display in the store. Although this little puny but you can not ignore it. You do not know how many times have the laptop display is switched on and diutak atik people. When the laptop is the only one in the store, you can search for it in other stores. Thus a few tips from me when you want to buy a laptop. If there who want to add my persilakan. Finally, a safe shopping.

Source : http://www.blogdokter.net

PC Startup Troubleshooting Tips

2008-12-16T05:28:00.000-08:00

As wonderful as computers can be, they can also be incredibly infuriating. Probably the most frustrating problem computer users run into are startup problems, where your computer won’t boot. Equally annoying are error messages you constantly run into during your computer’s startup process. In this article I’ll give you a few tips on how you can avoid some of the most common problems that happen right after your computer turns on.

Learning the Boot

Before getting into the troubleshooting details, you need to know a little about when goes on during the startup process. The reason is, there are actually quite a few steps that occur in between flipping the power switch and hearing the familiar Windows 95, 98 or Windows ME startup sounds and seeing the Windows desktop. In fact, there are a whole series of files that are automatically loaded one after the other when you turn your computer on. The trick with troubleshooting startup problems is trying to figure out which of those files (or what step in the process) causes your specific problem to occur. If you don’t know approximately where in the startup process your holdup happens, you could end up wasting an inordinate amount of time (and even causing more problems) on something that’s irrelevant to your situation. So, here goes.

When your computer is first turned on, it automatically loads a program called the BIOS, or Basic Input/Output System, which is stored on a special chip on your computer’s motherboard. The BIOS is essentially a combination of software and hardware in that it consists of software, but the contents of that software is stored in a hardware chip. On most recent computers, the BIOS can be updated via a process called flash updating, which uses a piece of software that’s stored on a special startup floppy disk to overwrite the contents of the chip with a new version. On older computers, however, to upgrade the BIOS software you need to physically remove and replace the chip itself. (BIOS upgrades are often a necessary step in solving hardware-related problems. See the "PC Hardware Troubleshooting Tips" article for more.)

One of the first things you should see on your computer’s monitor when you start your PC is some type of message that’s akin to "Hit Esc to enter Setup," although instead of Esc it may say F2 or F10 or any number of other keys and instead of Setup it may say CMOS Setup or BIOS Setup or just CMOS. Make note of the key required to enter the Setup program because you may need that later (some startup problems can only be solved by changing some BIOS/CMOS settings via the Setup program).

As the BIOS runs, it performs a number of tests on your hardware called POST (Power On Self Test), such as checking the memory. Then it lists any devices that it finds attached to your computer’s internal IDE controller(s). Typically, this is any internal hard drives, CD/DVD-ROM drives, tape drives, etc. One common problem you can check for is to make sure that all the devices that are supposed to be attached to the IDE controllers are listed. If not—for example, if you just upgraded your hard drive or added a DVD-ROM drive and you don’t see a reference to them right after your computer turns on—then more than likely there is a connection problem between the IDE controllers on your motherboard and the device itself. You’ll have to open up your PC, check the cable connections at both the drive and on the motherboard and, if necessary, replace your IDE cable(s). In a few rare instances you may also have to make some changes to your hard drive settings in the BIOS Setup program mentioned earlier.

Another possible problem if a drive that used to appear in that listing no longer appears is that a physical problem has occurred with the drive. (Computer peripherals don’t last forever after all—although you should get at least five years out of a hard drive or CD-ROM drive.) If that’s the case, check the cable connections—sometimes they just come loose—and then run a disk utility such as ScanDisk or Norton Utilities’ Disk Doctor from a boot floppy disk to see if you can salvage any of your data. More than likely in this scenario it’s time to start thinking about a new hard drive.
If you have a SCSI controller installed in your PC, you will also see a message about any BIOS (separate from the main system BIOS) that it has, as well as a listing of all the internal and external SCSI devices attached to it. Again, if you don’t see a device listed, you need to double check the cable connections, or check the integrity of the devices themselves. One other possible issue with SCSI devices has to due with SCSI termination issues, which I discuss more thoroughly in the "Mac Hardware Troubleshooting Tips." (SCSI is SCSI, regardless of platform, so the concepts explained there are just as relevant for PC people as they are for Mac users).

Mastering the Master Boot Record

After the BIOS finishes it work, it hands control of the startup process to some specific files stored in the first sector of your hard drive. This special area is called the master boot record and it contains critical information about how to start Windows (or any other operating system(s) you may have installed on your PC) as well as the specific files needed to continue the startup process.
Because of critical role it plays, your hard drive’s master boot record is also a favorite target of virus writers. Why you wonder? Well, if a virus corrupts or rewrites your master boot record, your computer won’t work (and people who create viruses seem to get some sick pleasure out of causing computers to "break"). Viruses that target this area are called, logically enough, boot viruses and they are probably the most common type of virus there is (other than Word macro viruses, that is, but those aren’t typically very lethal). Most anti-virus programs can take care of boot viruses, but only if you have a boot floppy disk with the anti-virus program installed on it (otherwise you can’t boot your computer to get to the anti-virus program to run it!).

If you’re really stuck, one other trick you can try is to use the Fdisk partitioning program, which comes with any version of Windows, to rewrite the master boot record. You’ll need a boot disk with the Fdisk and Sys programs on it for this trick to work (see "Creating a 'Real' Windows 95 (or 98 or ME) Boot Disk" for more on how to do this). You can find both those programs (as well as other DOS utilities) in the Commands folder inside your Windows folder.

As with any startup floppy disk, you need to turn your computer on with this floppy disk in the floppy drive and then the computer will use it to start the computer instead of trying to use your hard drive. If your PC boots successfully from the floppy, you should be taken to a DOS command prompt that says A:\. To make anything work under DOS you have to type in commands that tell the computer what to do, so use the following commands to continue with this process (hit the Enter key after each one).

c:
fdisk /mbr
sys c:

The first command switches over to your main hard drive, the second command tells the Fdisk program to rewrite the master boot record, and the third command rewrites the critical startup files back to your master boot record using the DOS Sys program. I’ll warn you now that this technique doesn’t always work (and in some cases you may need to reinstall Windows), but if you’re desperate, it’s certainly worth a try.

Starting the Startup Files

If you’re not having any problems up to this point, and your computer continues to boot, then that means your master boot record and a few of the critical startup files (such as Io.sys) are fine.
Next up are some old DOS startup files that—despite Microsoft’s claims to the contrary—continue to play an important role for Windows on many (though not all) PCs. Specifically I’m referring to the Config.sys and Autoexec.bat files, which are typically used to load device drivers and startup programs, respectively. (Device drivers are pieces of software that are used to communicate between the operating system and all the different peripherals inside your PC, such as your CD-ROM drive, sound card, modem, etc.) In addition, these files can be used to set up a few relatively obscure system parameters that usually don’t have any impact under Windows 95, 98 or ME.
If you have Config.sys and Autoexec.bat files on your PC (again, not all systems do), then any commands that they contain are automatically loaded or any programs that they refer to are automatically started when they themselves are loaded. One very common problem that occurs when you install new software (or hardware) on your PC is that the installation program may add a line to one of these startup files. This line (or lines) tells your PC to automatically load some software that the new program (or piece of hardware) that you just installed requires. Unfortunately, sometimes those new startup programs conflict with other software you already have installed on your system and cause the boot process to stop or your system to crash. (See the "PC Software Troubleshooting Tips" article for more on how to deal with those types of problems.)

Another related problem can occur when you remove software (or hardware) from your system. Depending on how you removed it or how the program’s uninstaller works, you may end up with a situation where there are references in one of these startup files to programs that no longer exist on your hard drive. In most cases like this you’ll get some type of error message that says something about being unable to find a particular file, but if you hit OK, your system often continues to boot and works just fine. In other words, it’s not causing any real problems for your PC, but it can be somewhat disconcerting or, at the very least, annoying.

In either the first or second example (but particularly the latter), the solution to the problem usually involves removing the reference to the problem line in your startup files. In other words, you tell your computer not to try and load the files that are either causing a conflict or no longer exist. You can do that by either finding the specific line in your Config.sys or Autoexec.bat file and deleting it or by essentially telling your PC to ignore that particular line by "remarking it out." There are two ways to do this as well. You either type rem and then the space character at the very beginning of the offending line, or use the semi-colon (;) character at the beginning of the line. So, for example, a line that previously said:

Device=Nec_bm.sys
Would change to:
Rem Device=nec_bm.sys or ;Device=nec_bm.sys.

To edit your Config.sys or Autoexec.bat files (which should find in the root directory of your main drive—typically C:\) under Windows 95, you need to use some type of text editing program, such as Notepad, or the DOS Edit program. The easy way to do it, however, is to open the Run… command window off the Start menu and type in Sysedit, which launches the System Configuration Editor. This utility program automatically opens the five main startup files (including Config.sys or Autoexec.bat) in five overlapping windows for easy editing. Regardless of how you open files, you can make any necessary changes to the file(s) and save it (or them).

Windows 98 makes the process much easier by providing a program called the System Configuration Utility that lets you individually turn on and off lines in any of your startup files, including Config.sys and Autoexec.bat (as well as lots more that I’ll be getting to in just a bit). You can find the powerful System Configuration Utility via the System Information Tool, which is available off the Start menu via Programs, Accessories, System Tools. Launch System Information Tool and then from its Tools Menu you’ll find the System Configuration utility (as well as other very useful troubleshooting tools—this is one area where Windows 98 and Windows ME offer clear benefits/improvements over Windows 95). The easy way to launch the program it is to select Run… from the Start menu and type in msconfig.exe.

And More Startup Files

After the Config.sys and Autoexec.bat files (if present) load, the System.ini and Win.ini (again, if present) load. While these files are primarily leftovers from the days of Windows 3.1, they too can have a role in the startup process. And similarly, the exact same kinds of problems that can occur with Config.sys and Autoexec.bat can occur with these files—specifically, references to startup files that conflict with other programs or no longer exist on your system. In addition, though rare, it’s possible that certain settings in the System.ini or Win.ini can cause startup problems.
Thankfully, the exact same methods that you use to solve problems with Config.sys and Autoexec.bat can be used with System.ini and Win.ini. The respective System Configuration utilities I mentioned above will open them and let you delete or remark out references in those startup files as well. In addition, you can manually edit or, in some cases, simply delete settings in these files that are causing problems. (Of course, you may want to make a backup copy of them before you start deleting anything.)

Reading the Registry

The first "real" Windows 95/98/ME file to load is the massive Windows Registry, which keeps track of loading all the 32-bit Windows 95/98/ME drivers—their filenames typically end in .vxd—for all the peripherals in your PC. (The previously mentioned Config.sys only loads older 16-bit drivers that you solely need under DOS.) The Registry is in charge of loading a ton of other important operating system files as well. If you ever want to see just how many, take a look at the Bootlog.txt that you’ll typically find in the root directory of your C: drive. (You’ll have to turn on hidden files in Windows Explorer by going to the View menu, selecting Folder Options and going to the View tab in order to see it.)

When you see the text message that Windows 95, 98 or ME is starting to load (and then when you see the Windows splash screen), then you’ll know that your PC has begun loading and "processing" the registry.

If you don’t quite make it to the Windows splash screen, you could have a problem with one of the low-level drivers that form part of the Windows Virtual Machine Manager (or VMM). The VMM is what lets Windows run multiple applications at once (which makes your PC appear to be multiple "virtual" machines in one—hence the name). Typically, you’ll see a message that refers to being unable to load vmm32.vxd. In reality, vmm32 refers to a folder located inside your Windows/System folder on your main hard drive that holds several driver (.vxd) files. In some situations this error message may indicate that some of the low-level drivers stored in this folder have been corrupted, which typically requires you to re-install Windows. However, I have found that simply turning the computer off, letting it rest a few minutes, and then turning it back on sometimes takes care of the problem all by itself. (In fact, this is a good piece of advice for startup problems in general.)
In other situations, stopping right before the Windows splash screen could indicate a corrupted Windows Registry. That’s never a good problem to have, because it often requires re-installing Windows and all your applications (because application preferences are also stored in the Registry). You might be able to fix some Registry problems with Microsoft’s free RegClean if you can find it (it's no longer available on the Microsoft web site) or, if you have Windows 98 or ME, by running the Scanreg (DOS) or Scanregw (Windows) utilities bundled with that OS.

If your registry is completely hosed, you can go back to a previous version (or any one of five or more previous versions under Windows 98 or ME), by renaming the Registry backup files that Windows automatically creates every time it successfully starts up. The two files that actually make up the Registry are called System.dat and User.dat and the main (or most recent) backups of those files are called System.da0 and User.da0. You’ll find all of these files at the main level of the Windows folder. To make use of the backups you’ll need to boot to a DOS prompt and then rename the System.da0 and User.da0 files to System.dat and User.dat respectively, overwriting the other files in the process. To do that in DOS, you use the following commands:

Rename system.dao system.dat
Rename user.da0 user.dat

Once you’ve done that, you’ll need to restart the machine (holding the Control, Alt and Delete keys simultaneously always works), and then reboot from the hard drive to make the changes take effect. This is a good technique to use if you just installed a new application and start having Registry-related problems immediately afterwards because it will revert the Registry to the state it was in before you did the install. If you made the installation a few days (or, more importantly, a few "restarts") ago, then the backup versions will have the same problems as well, so this technique may not work in those situations.

Registry Drivers

If your computer makes it to the Windows splash screen before it stops, you probably have a driver-related problem. Many PC startup problems are the result of drivers that don’t load properly from the Registry, either because of a conflict with another driver, because a driver has been corrupted or accidentally deleted, or other possible problems. Unfortunately, there’s no easy to way to edit the Registry in the same way you can with other startup files, so Windows provides other options if your computer stops the boot process at this point.

The most common one is known as Safe Mode, which is essentially a limited, or minimal version of Windows that loads when your PC is having problems. Thankfully, in many situations Windows is smart enough to know when a problem has occurred and will automatically start in Safe Mode (or at least give you the option to start in Safe Mode) the next time you restart. In some situations you may also want to force your computer to start in Safe Mode. To do that, hold down the F5 key when you start up and keep holding it until you see that your PC has booted to Safe Mode. You can easily tell this because your screen resolution will be reduced to the VGA standard 640 x 480 resolution and you’ll see the words "Safe Mode" all over the screen. (Another way to do this is to hold down the F8 key during boot time until you’re presented with the Windows Startup Menu and then choose Safe Mode from the list of options presented there.)

When you’re in Safe Mode Windows skips the Config.sys and Autoexec.bat files and loads a minimal set of drivers that lets your PC function at a basic level. However, usually you can’t print, use your modem or do lots of other things you would normally otherwise be able to do. You can, however, run most of your applications, so if you’re desperate to get some work done and your machine keeps crashing, you may want to consider simply working in Safe Mode for a while.

The idea of Safe Mode, however, is to let you do things like install driver updates or make other software changes (such as changing references to start up files, as discussed earlier) while in a familiar Windows environment. Once you’ve made your changes, you can restart the machine and check to make sure that everything works.

Another common startup troubleshooting technique is to take advantage of the Step-by-Step Confirmation mode that Windows also offers you when you use F8 to boot your machine. In step-by-step mode, Windows asks you before it loads certain programs called for in your startup files. The idea is that by loading files one at a time, you can more quickly tell what’s causing the problem. Basically, you say Yes to each prompt until your machine freezes and you’ll learn the culprit. Note that this mode processes the entire Registry at once, however, so if the problem is a particular file called for in the Registry, this method won’t tell you which one it is.

Still More Places for Programs to Run

Believe it or not, we’re still not done yet, particularly if you’re trying to track down all the different programs that can be loaded automatically when your computer boots up. Some applications and utility programs, for example, take advantage of the fact that in addition to loading drivers, the Windows Registry can also automatically load applications (or small programs that continuously run in the background while your PC is on) in a kind of "hidden" way. The only way to find these is to open RegEdit, the built-in Windows Registry editor and go to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion section of the Registry and click on the Run, RunOnce, RunOnceEx, RunServices, and RunServicesOnce keys inside the Registry. Each item you see listed on the right hand side is started up each time Windows boots.
To prevent any items listed in any of these keys from starting up, you need to delete the specific settings from the key by right-clicking on it and selecting Delete from the context menu that appears. Select all but "Default" if you want to get rid of all of them and simply quit RegEdit when you're done. (Note that deleting these settings will not delete the software they're pointing to, just the command to launch them at boot time.) I don’t recommend you edit the Registry unless you know exactly what you’re doing, but this simple procedure can be helpful.

Finally, the last step that occurs in the Windows startup process is to automatically launch any programs that have shortcuts stored in the Startup folder, which you can find inside the C:\Windows\Start Menu\Programs directory. As with Registry’s Run keys, some applications and utility programs take advantage of this feature to automatically launch program’s every time you start Windows. Using the Startup folder is a more "public" way of doing it, however.
Unlike the Registry, fixing problems related to the Startup folder is easy—simply drag the shortcut of the offending application (or anything else you want to keep from starting automatically) out of the Startup folder and onto your Windows desktop. If you prefer, you can even delete it—as long as it’s just a shortcut it won’t affect the real application. The next time you restart your machine and Windows loads, whatever you’ve taken out of the Startup folder simply won’t start automatically. You can start it manually any time you want, however, by simply double-clicking on the shortcut icon you dragged to your Windows desktop.

The End

As you can see, there’s quite a bit to the Windows startup process. In fact, if you had to go through all these different techniques it could literally take you days to figure out what your problem was and what was required to fix it. If you can narrow down where in the process your particular problem occurs, however, you can save yourself a lot of time and effort.

Ultimately, all computer troubleshooting problems—including those related to startup—are solvable, but that doesn’t mean they’re necessarily logical, nor easy. (If you feel like you've invested enough time, you can always just start over and reinstall everything. See "Starting Over: Repartitioning, Reformatting and Reinstalling" for more.) As with all difficult procedures, perseverance, common sense and a bit of good luck is what you’ll need to get through your startup problems and get back to enjoying your PC. Good luck.

By Bob O'Donnell

Cropping image

2008-12-15T07:04:00.000-08:00

1. Insert - picture - clipart.
2. Previous first to enable the Picture toolbar (View - toolbar
- Picture).
3. Activate the image icon and select 'crop'.
4. Place the icon 'crop' in one box on the frame.
5.Then drag to crop the image desired

1. Insert - picture - clipart.
2. Sebelumnya terlebih dahulu aktifkan toolbar Picture ( View - toolbar
- picture).
3. Aktifkan gambar dan pilih icon 'crop'.
4. Letakkan icon 'crop' di salah satu kotak pada frame.
5. Kemudian drag untuk memotong di bagian gambar yang diinginkan.

Color in the image | Memberi warna pada image

2008-12-15T07:01:00.000-08:00

Follow the steps below to color in MS Word:

1. Click the Insert menu - pictures - clipart.
2. Activate the image by clicking the picture.
3. Right-click - select 'edit the picture.
4. Click on the picture you want to be given color by selecting the icon
'fill color.
5. If you want to delete parts of the image, select objeknya first and press the delete button.
6. Click 'close picture' when you have finished editing the picture.

Ikuti langkah di bawah ini untuk memberi warna pada MS Word :

1. Klik menu Insert - picture - clipart.
2. Aktifkan gambar dengan cara mengklik gambar tersebut.
3. Klik kanan - pilih 'edit picture'.
4. Klik bagian dari gambar yang ingin diberi warna dengan memilih icon
'fill color'.
5. Bila ingin menghapus bagian-bagian tertentu dari gambar, pilih objeknya terlebih dahulu dan tekan tombol delete.
6. Klik 'close picture' bila telah selesai mengedit gambar.

Penetrate the BIOS password

2008-12-15T06:58:00.000-08:00

BIOS password, is very useful to protect your computer so that no other person can change the configuration of your computer. But it can be a catastrophe if you forget. So, if you forget your BIOS password, below we show the default password is originally provided by the author to anticipate the event to remember the password. You need to do is to try one by one until the password you find :-)

AWARD BIOS
01322222, 589589, 589721, 595595, 598598, AWARD SW, AWARD_SW, SW Award, AWARD PW, _award, awkward, J64, j256, j262, j332, j322, HLT, SER, SKY_FOX, Ally, Ally, Condo, CONCAT, TTPTHA , APAf, HLT, KDD, ZBAAACA, ZAAADA, ZJAAADC, djonet, øåñòü ïpîáåëîâ%%%% äåâÿòü ïpîáåëîâ

AMI BIOS
AMI, AMI, AMI SW, AMI_SW, BIOS, password, Hewitt RAND, Oder

CERTAINLY
BIOS, CMOS, lynziedoll, CERTAINLY

Other password that you can cob
LKWPETER, lkwpeter, BIOSTAR, biostar, BIOSSTAR, biosstar, ALFAROME, Syxz, Wodj

Source: www.elfqrin.com

Deleting files TEMP

2008-12-15T06:54:00.000-08:00

Add the following line in your autoexec.bat file:

if not exist% TEMP% \ *. TMP goto EndTMP
atrrib% TEMP% \ *. TMP-r-a-s-h
del% TEMP% \ *. TMP
: EndTMP
So now every time you start your computer in-booting, will automatically delete the files *. TMP.

Changing the logo Shut Down

2008-12-15T06:51:00.001-08:00

At shutdown, the files are logow.sys (please .....) and white while logos.sys (it's now save to ......). Second hidden files are located in the Windows directory (usually C: \ Windows). To change the way the second picture above. If you do not want to bother to edit the file, you can use the software (one) Win Logo Changer to change the start-up screen and shut it down.

Changing the logo startup

2008-12-15T06:48:00.000-08:00

1. At the start, then Windows will call logo.sys file that is located in the main directory (C: \). Logo.sys file is a hidden file, so to see them open Windows Explorer, click View - Folder Options. Pidah to the View tab, give the check on the Show All Files. Click OK. Then with Windows Explorer, right-click on the file logo.sys, select properties and lose all of the check.
2. Create a backup file backup if necessary.
3. Move to a DOS prompt. Move to the main directory (c: \). Type "ren logo.sys logo.bmp" (without quotation marks).
4. Open the file logo.bmp with your favorite image editor (Paint, PhotoShop, PhotoPaint, etc.).
5. Edit the image as necessary and save the file again as logo.bmp.
6. Back to the DOS prompt, change the name logo.bmp with logo.sys by typing ren logo.bmp logo.sys.
7. Restart Windows.

If you want to change that image with the other, the things that need to be considered are:

1. Figure that will be used instead of color have as many as 256.
2. File size less than 127 kb.
3. Large / image size 320 x 400 pixels
4. The extension should be. Sys.

Improve the performance of your computer

2008-12-15T06:47:00.000-08:00

Right-click My Computer, choose Properties. Select the Performance tab on the Virtual Memory. Select Let me specify my own virtual memory settings. In the Minimum and Maximum, content with 2 or 3 times your RAM. So if you have 32 MB of RAM, content to 64 Mb.

Changing the drive icon

2008-12-15T06:45:00.000-08:00

The drive icon, which is digantiBosan with the drive icon monoton? Replace it! How: 1. Run Notepad. 2. Type: [AutoRun] Icon = C: \ Icons \ iconsatu.ico (assumption: There are files in the directory iconsatu.ico Icon. You can change the location of the file icon and you) 3.Simpan with the name autorun.inf and place the root directory on drive C. If you want to change the drive icon and the other, live replace letters with the letter C drive will be replaced.

Changing the color of the Blue Screen of Death

2008-12-15T06:44:00.000-08:00

You are already familiar with Windows certainly never experienced this: the screen suddenly blue, white papers and computer hangs. Now, you can change color with the color of your contentment. How, click Start - Run, enter sysedit. Select system.ini. Then find the paper [386Enh], and write underneath:
MessageTextColor = 8
MessageBackColor = 4
Change the numbers 8 and 4 with the color of your trouser (Black = 0 Blue = 1 Green = 2 Cyan = 3 Red = 4 Magenta = 5 Brown = 6 White = 7 Gray = 8 Bright Blue Bright Green = 9 = A Bright Bright Cyan = B Pink, red = C = D = Yellow Bright White E = F)

Overcome the computer hangs

2008-12-15T06:43:00.000-08:00

Your computer to hang? Press the button [Ctrl] + [Alt] + [Del]. Click on the programs that have problems (marked with a note not Responding). Press End Task button. The third button is not working press [Ctrl] + [Esc] to raise the Start menu. After downloading, you can shut down your computer.

Various options for the Windows 95 setup

2008-12-15T06:42:00.002-08:00

From the DOS prompt
/ is - Ignoring the system checks
/ ap - mengabaiakn checks on the remaining capacity on your hard disk
/ iq - Ignoring scandisk
/ in - Conducting setup without the Network Setup Module
/ iw - skip the various warning from Microsoft (such as warnings, etc.)

Changing file associations quickly

2008-12-15T06:42:00.001-08:00

To change file associations (the program used to open the file) you do not need to go to registry. How easy is that select the file you want to change. Press the Shift key and right click on the file menu that appears with the Open. Click on the menu and select the program that will be used to open the file type. Give the check on the "Always use this program to open this type of file." Finally click OK.

Shortcut to Log Off

2008-12-15T06:41:00.001-08:00

To accelerate the log off you can create shortcuts on the desktop. How:
1. Right-click an empty area on the desktop and select New - Shortcut.
2. In the command line type C: \ Windows \ RUNDLL.EXE shell32.dll, SHExitWindowsEx 0
3. Click next and give the name of the shortcut.
4. Finally click Finish.

Shortcut to Restart

2008-12-15T06:40:00.000-08:00

To accelerate the restart you can create a shortcut on the desktop.
Method 1:
1. Right-click an empty area on the desktop, select New - Shortcut.
2. In the command line type C: \ Windows \ RUNDLL.EXE user.exe, exitwindowsexec.
3. Click next and give the name of the shortcut.
4. Finally click Finish.

Method 2:
1. Run Notepad.
2. @ Type exit.
3. Save with the name restart.bat in the C: \
4. Run Windows Explorer, right-click and drag the file to your desktop.
5. On the menu that appears select Create Shortcut (s) Here.
6. Right-click the shortcut, select Properties.
7. Move to the Programs tab, give the check on the Close on Exit.
8. Click the Advanced button.
9. Mark pilhan MS-DOS mode, and delete options warn before Entering MS-DOS mode.
10. Click OK, and OK again to close the Properties dialog box.

Shortcut to Shutdown

2008-12-15T06:39:00.000-08:00

To accelerate the shutdown you can create shortcuts on the desktop. How:
1. Right-click an empty area on the desktop and select New - Shortcut.
2. In the command line type c: \ windows \ rundll32.exe users, exitwindows.
3. Click next and give the name of the shortcut.
4. Finally click Finish.

How to Buy a Domain Name

2008-12-15T06:18:00.000-08:00

Your domain name is your identity, your address and your work descriptor, all rolled into one. Ideally, your domain name will be easy to remember as well as have something to say about the nature of your work. Spend significant time going over the possible options available for your domain name before you actually register your name

Tips on buying a domain name

Make the domain name as specific and unique as possible.

Try and relate it as closely as you can to your core business, but make it easy for people to remember. Ideally, the domain name should include a keyword for your business or Web site as a part of the name itself.
Choose your domain name.Keep it short. Try and keep the spelling simple and straightforward. Single word domains are best, though two and even three-word combinations also work provided they’re easy to remember. Try and register your domain as “.com” and not “.net, .biz” or some other URL suffix. Lots of people still associate most businesses with .com!

Select a domain name service provider or register.

Once you have chosen a domain name for yourself, you will need to visit the InterNIC Web site and choose a domain name service provider or registrar. There are many such companies offering many services, and you will need to choose the best deal for you.Having chosen the company with which you will register your domain name, you can get on with the task of figuring out if the name you have selected is available. The homepage of the service provider you choose will usually provide a search box where you can type in the name you want The search will determine if the domain name is available. In case the name you chose is not available the search results will usually offer some alternatives that are close to your original choice.

Register

Once you have found a domain name that is available, go ahead and fill out the Registration form and contact information as required. Provide real information for the registration details since you may be contacted for verification of ownership of the domain name.For medium-to-large businesses, it may also make sense to register the most common variations of your main domain name. This will enable visitors to still reach your Web site even when they type a letter wrong, or hyphenate your domain name when searching.Ask for verification that the domain name is registered to you and not to your registration service provider. Some registrars will register the name as belonging to them, which can create problems when you want to switch to another service provider, or want to transfer the domain name.

How to Implement Basic Computer Maintenance

2008-12-14T08:19:00.000-08:00

This one when you think so. Maintenance routine computer is easily done, without the need to understand programming languages, or sciences, are only covered by the IT people. Simply use the program, which is available by default in your windows, or use the program free program - for free does not mean bad performance, even software that I recommend in writing that this is the best in the field -. user friendly, easy done without the need to be a complex process, the implementation of maintenance can be done easily, quickly and satisfactorily.

We often have a condition where the computer's performance slowed, and we do not feel an error related to the computer, whether to install the program "strange", or other matters that might affect the performance of computer melambatnya.

When the computer's performance slowed, many things that can be the cause:

* Too many programs are installed, of course, make a computer slow because many programs running in the background, this will not become a problem when Processor (which I Duo, and the Core Two Duo) and RAM you have a large capacity (at least 1 GB for Windows XP, at least 2 GB for vista)
* Hard, I had the defragment, this makes computer hard drives to be read slowly, because the location of the file does not fit array
* Frequently install and uninstall the program, this raises the occurrence of cumulation "waste registry" adequate performance of the computer.
* And infected with adware or spyware, this is in addition to making slow computer performance because the program "a perversion of this background work, and also delay our Internet connection, because the program" to send this data to data in computer continuously through the Internet, which (again more annoying) is not known by us without a popular science program and good enough.

To overcome this problem, there are several alternatives:

* Upgrading RAM, in accordance with the minimum that I give, for processor, if you use a desktop, can be done provided that the upgrade your motherboard supports, when the laptop is used, you should be forced to buy a new laptop.
* Defragment hard drives regularly, at least 1 month, the better more often, simply use the defragmenter provided by the windows (start>> all programs>> accessories>> system tools>> disk defragmenter
* To clean the garbage bin registry that disrupt the performance of the computer, use a registry cleaner is good enough, can use as a free Glarysoft Registry Repair, or the Licensed as Tune Up Utilities 2008.
* Adware and spyware are often not detected by most antivirus software, including kaspersky or AVG, especially norton (but still make a packet of norton). To detect, there is a very good tool, also freeware! Please try Spybot Search & Destroy 1.4 here.

For the performance of computer maintenance, do defragment, registry cleaning, the virus checks using antivirus software that is selected, and the adware and spyware checks regularly! Guaranteed your computer will be fixed quickly, although its performance is more than one year.

Oh yes, the system restore is a rift is the most used by both viruses, adware and spyware, how to save the data with the data in the system restore, so if done Restoring, will appear again.

Protection computer will not be complete without the international antivirus.Antivirus what should be used? I recommend Kaspersky Antivirus (Licensed) or Avast Antivirus. Avast is the best free antivirus software, followed by AVG Antivirus. But according to my kaspersky sampa current antivirus software is the engine with the most intelligent, during the packing and I think there is a false detection, as happened in the AVG or NOD-32. The disadvantage of this kaspersky, eating enough resources when compared with AVG, NOD-32 or Avast. But when compared with Norton or McAfee, certainly far more lightweight.
To overcome the local Indonesian virus virus, the most dogged ANSAV was using, in addition to free antivirus software is created by the community and dimaintenance Reverse Engineering of Indonesia, which is one of the members of antivirus software manufacturer for specific brontok. Unfortunately his website ANSAV slow when the access from outside Indonesia.

Overcome The Problem "generic host process for win32 services"

2008-12-14T04:01:00.000-08:00

Host Process for Win32 Services Error, or that Likewise it? Irritated?
This,
when it appears as a message, usually a computer and can not
connecting to the internet, and although we try to downloading Disconnect connection
we, still can not connect again, unless already restart.

Characters such as this:

1. When is good-easy way to do smth surf on the internet, you see the icon
Internet remain connected in the system tray, but you can not surf,
browse or do anything.
2. You get a message
error, such as "Generic Host Process for Win32 Services has encountered
a problem and needs to close. We are sorry for the inconvenience. "
3. An error report about the failure netapi32.dll and svchost.exe.
4. You try to Disconnect your Internet activity because the Internet but not the Internet icon is not visible.
5. You receive an error message such as "Your PC has recovered from a serious problem", etc..

And how to overcome the problem?
Marinate
if the dialog box is not closed or left is OK,
usually connection we will continue to run. So do not hurry to press
the OK button in the dialog box, but hide it in place
that is not visible or does not cover the screen, and will koneksipun
persist. However, it is usually only lasts a few minutes
only, and some time later, the screen will 'blink' white, and
still running, but the connection is not connected.

The fact is very easy to find a solution, that is,
search for
champion in the Google by typing the keyword "Fix Generic Host", and
You will find many blogs that write about issues
it. Among them are such that the following will be parsed.

Closing Port 445:

1. Start Registry Editor (Regedit.exe) by clicking Start menu, then click Run.
2. In a small box that opens, type: regedit and then click OK. Registry Editor is now open.
3. Look registry follows:
HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Services \ NetBT \ Parameters
In the right window's search option called TransportBindName.
Double click on that number, then delete the default value, so that a blank (blank value).

Closing Port 135:

1. Then you must find the key to the following:
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ OLE
2. You will see a String Value named: EnableDCOM
Set it to value: N (usually written Y)
3. Close Registry Editor. He restart your computer.

Caution:
Before making changes in the registry, should dibackup
first, because there is the impact of changes in the registry,
such as a LAN connection is not connected, dlsb.

There are 4 new solutions for the Generic Host For Win32 error in Windows, which is taken from Sizlopedia:

Solution # 1:

Click 'Run' and type 'Regedit'
Click part:
HKEY_LOCAL_MACHINE> SYSTEM> CurrentControlSet> Services> Browser> Parameters
Look by clicking Find keywords: IsDomainMaster
and set
Data: False
Restart you PC.

Solution # 2:

Click 'Run' and type 'cmd'
Please 'netsh' command in the console and press enter
Kemduian type 'Winsock' and press enter and write reset
Restart your PC.

Solution # 3:

Download LspFix (http://cexx.org/lspfix.htm) and follow the steps provided.

Solution # 4:

Download the Microsoft Update patch (http://support.microsoft.com/kb/894391) and run. "Bands to Nirmal for this."

Hopefully one of the above solutions will resolve the error.